1) Connection Fitting
2) Seals
3) Ceramic Element
4) Hybrid Electronics
5) Cable Joint PG7
The pressure transmitter type 506 with proven ceramic technology, features calibrated and amplified sensor signals which are available as standard voltage or current outputs.
The transmitters have a high resistance to extreme temperatures and exhibit no mechanical aging or creeping. They are manufactured in a fully automated assembly line to give an ideal cost-to-performance ratio.
The 506 series are specially developed for original equipment manufacturer applications involving industrial refrigeration technology. Minimum order quantities apply and test samples are available for qualified OEM customers.
Click here for information on our other Pressure Transmitters.
Pressure Ranges: Relative pressure/Gauge (measure-
ment of pressure relative to ambient pressure) Full
scale ranges determined by customer to 870 psi
(60 bar) Lowest f.s. pressure range is 102 psi (7 bar)
Max.Overload:
F.S. ranges to 580 psi (40 bar): 2x measuring range
F.S. ranges 580 to 870 psi (40-60 bar): 1160 psi (80 bar)
Rupture Pressure:
F.S. ranges to 580 psi (40 bar): 3x measuring range
F.S. ranges 580 to 870 psi (40-60 bar): 1310 psi (90 bar)
Accuracy:
Total of linearity, hysteresis and repeatability
< +/- 0.5 % fs (> 10 - 60 bar)
< +/- 1.0 % fs ( 7 - 10 bar)
Adjustment accuracy zero point and full scale (repeatable)
0 - 5 V ± 50 mV
1 - 6 V ± 50 mV
0 - 10 V ± 100 mV
10 - 90% ± 1%
Materials in Contact with the Fluid Medium:
Ceramic/303 Stainless steel
Sealing material: Neoprene
Housing Cover: Nylon (Pa 6)
Temperature Influences:
Medium and ambient temperature range: - 40°... + 80°C
Zero 10 … 60 bar < ± 0.04% fs/°C
Span 10 ... 60 bar < ± 0.015% fs/°C
Zero & Span 7 … 10 bar < ± 0.02% fs/°C
Load Cycle: < 50 Hz
Dynamic Response: Suitable for static and dynamic measurements.
Response time: < 5 ms
Signal and Power Supply:
| 0 - 5 V | 11 - 33 VDC | 3-wire cable |
| 1 - 6 V | 11 - 33 VDC | 3-wire cable |
| 0 - 10 V | 18 - 33 VDC | 3-wire cable |
| 4 - 20 mA | 11 - 33 VDC | 2-wire cable |
| Short circuit-proof and protected against polarity reversal (to max. ± supply voltage). | ||
| Output | Load | Current |
| 0 - 5 V | > 10 kOhm/<100 nF | 2 mA |
| 1 - 6 V | > 10 kOhm/<100 nF | 2 mA |
| 0 - 10 V | > 10 kOhm/<100 nF | 3 mA |
| 4 - 20 mA | < supply voltage - 11 V [Ohm] 0.02 A | 20 mA |
| Cable 1.5 m | IP 65 |
| Plug, DIN43650B | IP 65 |
Model Versions
A) Female thread, 7/16-20 UNF Schrader
B) Male thread, 7/16-20 UNF Schrader
C) Male thread, 1/4-18 NPT
D) PG 7 Cable Connection with 1.5 meter cable
E) Plug, DIN43650B
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS | |||||||
| A | B | C | D | E | F | G | H |
| Model | Seal Material | Calibration | Output | Electrical Connections | Pressure Connections | Housing Material | Pressure Range |
| 506.9XX | A= Neoprene | 0= Factory Calibrated | 1= 0-5 V | 0= Cable, 1.5 m | 0= 7/16-20 UNF female Schrader | 1= 303 SS | Customer Specified |
| 6= 1-6 V | 2= Plug, DIN43650B | 2= 7/16-20 UNF male Schrader | Contact us | ||||
| 2= 0-10 V | 3= 1/4 NPT male | 2= 303 ss with orifice/snubber on pressure port | F.S. ranges from 102 psi to 870 psi | ||||
| 3= 4-20 mA | Example: 0..300 psi= 0 to 300 psi | ||||||