CLARK

Dia-Vac Gaseous Diaphragm Sampling Pump

Dual Voltage 115-230v AC 50/60 Hz, 12-24v DC, 3.9-12.6 LPM

DESCRIPTION

 Dia-Vac® gaseous diaphragm sampling pumps are completely self contained and may be 
 used for either built-in or portable applications. These economical oil-free, contamination-free 
 and leak-free Dia-Vac® pumps may be used for flow and/or pressure/vacuum applications 
 and are CE approved.
 

Heated Single Head Dia-Vac^® Pump: This self contained head eliminates cold spots in sample systems. These models come complete with a type K thermocouple and two 50 watt cartridge heaters. The pump requires a digital temperature controller to prevent overheating. (See diagram below for measurements).

The Double head Dia-Vac^® is an excellent choice when added flow is required. This pump is also available in elevated and heated head options.

The Elevated Single Head Dia-Vac^® Pump is designed for high temperatures allowing the head to be inserted into a heated box with the motor remaining in an ambient.

The Single Head Dia-Vac^® may be used for continuous operation and is available in a variety
of eccentric sizes to conform to your system requirements.

SPECIFICATIONS

Voltage:
    Standard Configuration 115vAC-230vAC , 50/60 Hz
    Optional Brush or Brushless 12vDC-24vDC
Pipe Connector: 1/8"-27 NPT
Ambient Temperature: 104°F (40°C)
Up to 400¼F (204°C) media temperature with options
Pump Head Materials: Aluminum, Aluminum with Teflon Coating, 
 	316 Stainless Steel, 316 Stainless Steel with Teflon Coating, or All Teflon
Diaphragm Materials: Standard Teflon/EPDM or All Teflon option
Flow: Standard Eccentric size (.16) allows 7.6 LPM but optional eccentrics 
	available for reduced performance 
Weight

PERFORMANCE

ORDERING INFORMATION

Order Number Example: B161-FP-AA1

(Single Stage Dia-Vac¨ w/ SS heads, 0.160 ecc, All-Tef diaphragm, 115v/60Hz)