Model MA5690-1M data acquisition system accepts 9 to 99 measuring inputs depending on the configuration ordered. It has 2 outputs for RS232, Ethernet, analog, memory with drive for multimedia card or internal 512-KB EEPROM (option S).
- Data logger with external memory connector
and multimedia card, recording in standard
FAT16 file format, transmission to PC via
USB card reader
- Option EEPROM with capacity for 100,000 measures values, internally
configurable as linear or ring memory
- Sleep mode for long-term recording
- Measuring functions Measured value, zero-setting, setpoint adjustment,
maximum and minimum values stored with date and time-of-day, smoothing,
average values over time or over measuring points, limit value monitoring,
cold junction compensation, temperature compensation, and atmospheric
pressure compensation
- Sensor programming on the ALMEMO® connector itself
- 9 ALMEMO® input sockets, electrically isolated, for 9 ALMEMO®
sensors, 31 additional channels (maximum), (of which 4 internal function
channels)
- Extendible up to 99 inputs with various selector switch boards and maximum
100 meas. channels
- High-speed, high-resolution A/D converter, 24-bit, 2.5 to 100 measuring
operations per second
- Electr. isol. between measuring inputs and supply output sockets for digital
interfaces, analog outputs, trigger input, and alarm contacts
- 5 LEDs for indicating various operating states in the measuring circuit
- Cold junction measuring with 2 NTCs / insert and interpolation Ranges Pt100,
0.000 to 65.000°C, timer 6500.0 seconds
- Special ranges in the ALMEMO® connector, provided as standard, e.g. 0.000 to
50.000 ohms, NTC, -5.000 to 46.000°C, YSI 400 etc.
- Option KL User-defined linearization, multi-point calibration, and calibration
data management
- Accessories Rechargeable battery system, 8 AA-type NiMH batteries
- New:Device software update via interface AMR-Control programming software
(included in delivery)
- Devices are EMC tested as per industrial standard.
Operation: 1 key, 5 LEDs, 2 coding switches Memory: Multimedia card and USB card reader Memory (option S): Internal 512-KB EEPROM (100,000 measured values) Date and time-of-day: Real-time clock, buffered with lithium battery
Master meas. board: 9 ALMEMO® input sockets, electr. isol., with semiconductor relays Channels: 9 primary channels, 27 additional channels for double sensors and function channels, 4 internal function channels A/D converter: delta-sigma, 24-bit, 2.5 / 10 / 50 / 100 measuring operations per second, electrically isolated Sensor power supply: AC adapter, 12 V, maximum 400 mA, Rechargeable battery, 9 to 11 V, maximum 200 mA
ES 5690-UA10: 10 electrically isolated inputs for ALMEMO® flat connectors, 10 to 40 channels, with sensor supply, 2 plug-in slots ES 5690-UMU: 10 electrically isolated inputs, sensor connection with 10x MU connector, 10 to 40 channels, without sensor supply, ranges only, for all thermocouples, Pt100, Ni100, NTC, ohms, 2.6 V, 260 mV, 55 mV, 26 mV, 1 plug-in slot ES 5690-UTH: 10 electr. isol. inputs for all thermocouples with miniature thermal connector, 10 to 40 channels, 1+1 plug-in slots (dummy panel needed) ES 5690-UKS: 10 electr. isol. inputs, sensor connection with clamp connector, 10 to 40 channels, without sensor supply, ranges only, Pt100, Ni100, NTC, ohms, 2.6 V, 260 mV, 55 mV, 26 mV, 1 plug-in slot OA 5690-UKSU: Option, inputs with 100:1 divider for 10 V OA 5690-UKSI: Option, inputs with shunt for 20 mA ranges, mA and (4-20 mA) Dimensions TG 12 DU 77 x 145 x 218 mm (WxHxD) 1 slot TG 32 DU 179 x 158 x 232 mm (WxHxD) 6 slots TG 84 DU 444 x 158 x 232 mm (WxHxD) 19 slots BT 84 DU 483 x 132 x 273 mm (WxHxD) 19 slots Outputs: 2 ALMEMO®-sockets for all output modules (analog, data, trigger, relay cable etc.) internal alarm transmitter Power supply AC adapter: ZB1212NA3 90..250V, 12V DC, 2A DC adapter cable, electr. isolated: ZB3090-UK2, 10..30V, 12V DC ,1.25A Rechargeable battery pack: 8 NiMH-Akkus 9..11V, 1600mAh
(1) Module AP:rechargeable battery (option):
(a) Connection socket DC-A 12V AC adapter
(ZB 1212-NA3, 12V, 2A)
(b) Check lamps
DC-A: Mains supply present
CHARGE: Batteries are being charged
(2) Module MM-A9: Measuring circuit board ALMEMO
(c) Measuring inputs M0 to M8
M0 to M8: for all ALMEMO sensors
M9 to M39: 31 additional channels
(d) Code switches
G: device address 0 to 99
(e) Key ON/OFF, START/STOP
ON: ON
START: Start measuring operation
STOP: Stop measuring operation
OFF: OFF, Hold key pressed down
(f) Output sockets A1, A2
A1 Interface / optic fiber (ZA1909-DK5/L)
RS 422 (ZA5099-NVL/NVB)
Ethernet (ZA 1945-DK)
Bluetooth (ZA 1709-BTx)
A2 Network cable (ZA1999-NK5/NKL)
MMC-card connector (ZA1904-MMC)
A1/A2 Trigger input (ZA 1000-ET/EK)
Relay outputs (ZA 1000-EGK)
Analog output 2 (ZA 1601-RK)
(g) Connection socket DC 12V
AC adapter (ZB 1212-NA3/USA, 12V, 2A)
Cable,electrically isolated (ZB 3090-UK2,
10-30V)
(h) Ground socket
(i) Check lamps
ON: Device switched ON
START: Measuring operation started
REC: Measuring with results saved
COM: Measuring with output
ALARM: Limit value exceeded Sensor
breakage, LoBat
|
(3) Module U-A10: selector switch board 10 ALMEMO sockets
(j) Code switch M: measuring point x: 10 to 90
(k) Measuring inputs 0 to 9: for all ALMEMO sensors
x+10 to x+39 max. 30 additional channels
(4) Module U-MU: selector switch board 10x MU connector
Code switch internal: measuring point x: 10 to 90
on board
Measuring inputs: x0 to x9 for analog sensors
without power supply x+10 to x+39 maximum 30
additional channels
(5) Module U-TH: selector switch board 10 thermal sockets
Code switch internal: measuring point x: 10 to 90
on board
Measuring inputs: x0 to x9 for analog sensors without
power supply x+10 to x+39 maximum 30 additional
channels
(6) Module U-KS: selector switch board 2x5 clamp connectors
Code switch internal: measuring point x: 10 to 90
on board
Measuring inputs: x0 to x9 for analog sensors without
power supply x+10 to x+39 maximum 30 additional
channels |
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS | |
| Model | Description |
| 9 Inputs, max. 40 Channels, 2 Outputs, cascaded Interface, real time clock, 1 key, 1 ZB1212NA3/USA AC adapter 12V/2A | |
| MA56901M09TG1 | 19“ desk-top housing 12 DU, 1 free slot |
| MA56901M09TG3 | 19“ desk-top housing 32 DU, 6 free slots |
| MA56901M09TG8 | 19“ desk-top housing 84 DU, 19 free slots |
| MA56901M09BT8 | 19“ desk-top housing 84 DU, 19 free slots |
| Options | |
| ZB1212NA3/USA | AC adaptor, 12V, 2A |
| OA5690S | Options S: Internal EEPROM with capacity for 100,000 measures values |
| OA5690KL | KL: Linearization, multi-point calibration, and calibration data management |
| SB0000R | R: Temperature ranges for 8 coolants |
| ES5690AP | Rechargeable battery pack (8 cells NiMH, 1600mAh), 1 free slot with intelligent high-speed charging (3.5h) Selector switch boards |
| ES5690UA10 | U-A10 10 inputs for ALMEMO® flat connectors |
| ES5690UMU | U-MU 10 inputs with 10 x MU connector |
| ZA5690MU | ALMEMO® 10-fold MU connector for 10 sensors, 10-40 channels |
| ES5690UTH | U-TH 10 inputs with miniature thermal connector |
| ES5690UKS | U-KS 10 inputs with clamp connector |
| OA5690UKSU | Option KSU for ES5690UKS: inputs with 100:1 divider for 10 V |
| OA5690UKSI | Option KSI for ES5690UKS: inputs with shunt for 20 mA Accessories |
| ZA1904MMC | ALMEMO® memory connector for multimedia card |
| ZB1904MMC | Multmedia card min. 32 MB |
| ZB3090UK2 | C adapter cable, 10 to 30 VDC, 12 V / 1.25 mA, electr. isolated |
| ZA1000EGK | Trigger and alarm cable (2 relays, 1 ohm, 300 mA, 50 V) |
| ZA1909DK5 | ALMEMO® RS232 data cable, electrically isolated, max. 115.2kbaud, 1.5m |
| ZA1945DK | Ethernet data cable, electr. isol., max. 115.2 kbaud, 1.5m |
| ZA1999NK5 | Network cable, electr. isol., max. 115.2 kbaud, 1.5m |