PUMPS >> LIQUID PUMPS >> MGK300 Gear Pump With DC Motor

CLARK

MGK300 Gear Pump With DC Motor

Flow to 240 LPH (63.4 GPH), Pressure to 20 Bar (290 PSI)

DESCRIPTION

The MGK 300 series pumps are designed to complete the existing MG 200 series with improved performance in terms of flow rate, pressure, capability to handle high viscosity fluids and a wider offer of materials to suit most applications, from the food to the industrial and chemical markets.

The housing of the pump and the internal metal parts are AISI 316L .In/Out ports have 1/4'' NPT female threads. The gears are available in PTFE or PEEk™. The driving magnet is rare earth type, capable of driving the pump at high pressure.

The quality of the materials of the assembled components allows handling of fluids with temperatures up to 120°C (248°F).

The motor with adaptor and drive magnet is heavy duty, providing a reliable and noiseless operation in a compact size package. The pole-to-pole alignment of the two magnets provides the driving motion to the pump. Decoupling will occur when the pump load exceeds the maximum coupling torque provided by the alignment of the two magnets.

SPECIFICATIONS

Temperature ranges :
PTFE : -45°C (-49 F) / + 50°C (+122 F)
PEEK : -45°C (-49 F) / + 120°C (+248 F)
Max system pressure : 20 bar (290 psi)
Pump/Motor weight: 2 Kg (4.4 lbs)

TYPICAL APPLICATIONS

  • Medical and surgical equipment
  • Hemodialysis apparatus
  • Exhaust fumes treatment
  • Cooling systems
  • Ink-jet printing systems
  • Water purification and ultra-filtration
  • Lubrication
  • Seal flush
  • Lab instrumentation
  • Laser apparatus

 

DIMENSIONS (MM)

dimensions pump without motor

Drive, Adapter & Motor Assembly

Table 1
Drive, Adapter & Motor Assembly
Models include Drive Magnet (A), Motor Adapter (B) & Motor (C)
  MKCS08S MKCS11S
 Voltage (V) 12 DC 24DC
Rated Speed (rpm) 3.05 3.15
Current Consumption (A) 3.4 8.0
Output Power (W) 32 49.5
Weight (g) 910 980

 

FLOW CURVES

Flow Curves

Flow Curves

Continuous Duty Line

Notes: Beyond the continuous duty line a motor test is needed. Characteristics with water at 20°C and without relief valve, max vacuum 724 mmHg. Use filter before pump inlet not larger than 10 microns. Temperature requirements different from ambient temperature must be mentioned on the order.

 

ORDERING INFORMATION

1) Order Pump From Table 2 Below

ORDER NUMBER: ABCDEFG
EXAMPLE: MGK-309XPS17V

2) Order Drive, Adaptor & Motor Assembly from Table 1

EXAMPLE: MMKCS11S

Table 2 - Part Numbers
PLEASE CALL 1-800-253-2497 TO ORDER THIS ITEM
A=Pump Series B=Gear Width C=Housing Material D=Gear Material E=Relief Valve F=Connections G=Static Seal Material
MGK-3 09= 9mm X= AISI 316 T= PTFE S= without 17= 1/4" NPT S= Silicon
13= 13mm P= PEEK™ N= NBR
17= 17mm T= PTFE™
V= Viton

 

MG300 Seal-less Magnetic Drive Gear Pumps