MARCO

Series UP6 Gear Pumps for Water & Diesel Fuel

12 or 24 VDC, Flow to 6.9 GPM, Pressure to 29 PSI

DESCRIPTION

Model UP6 is a self-priming, compact, powerful, 12 or 24 VDC electric gear pump. UP6 is constructed of helical bronze gears, nickel-plated brass body and stainless steel shaft.

Use UP6 for fresh water, diesel fuel and other compatible media.

The E Option for UP6 is a built in pressure control whereby a factory programed pressure setting is maintained via a built-in microprocessor based variable pump speed control circuit that utilizes an internal pressure sensor for loop feedback. Main application is low cost pressure/flow control for small water and process systems.

SPECIFICATIONS

GENERAL

Ports: Tapped 1/2" BSP, pump supplied with 2 ea 1/2" NPT adaptors
Motor: 12VDC or 24VDC, powdered epoxy coated
Circuit Protection: Install fuse12 V, 15A; 24 V, 7.5A
Current: See Curves
Flow Rate: See Curves
Self Priming With Wet Gears: 4.92 ft (1.5 m)
Pump Duty: Intermittent
Motor Life: Approx. 2000 hours
Max. Operating Temperature: 14-140°F (-10-60°C)
Max. Relative Humidity: 90%
Pump Body: Nickel plated Brass
Gears: UP6/Oil, Bronze; UP6/P (PTFE)
Shaft: Stainless Steel
*Suitable Fluid Media:
	Fresh Water (max. 85°C, 185°F) & diesel fuel with
	viscosity between 2 & 5.35 cSt to 37.8°C, 100°F; minimum 
	flashpoint (PM): 55°C, 131°F
Unsuitable Fluid Media: DO NOT USE for gasoline, flammable liquids with 
	PM<131°F, liquids with viscosity>20 cSt, food products, corrosive
	chemicals & solvents.
	
* A model with lower operating speed is available for
lubricating oils and viscous liquids, consult factory.

DIMENSIONS (INCHES)

ORDERING INFORMATION

ORDER NUMBER: AB
Example: UP612V

PLEASE CALL 1-800-253-2497 TO ORDER THIS ITEM
A=Model	B=Voltage
UP6	12V= 12 VDC
	24V= 24 VDC
Options
-None
E= Electronic Pressure Control, Specify Pressure Setpoint
Note: A 250-400 micron filter is recommended for applications where the fluid media contains particles.