PUMPS >> LIQUID PUMPS >> Series UP9-PN Gear Pumps for Water & Diesel Fuel

MARCO

Series UP9-PN Gear Pumps for Water & Diesel Fuel

12 or 24 VDC, Flow to 3.2 GPM, Pressure to 58 PSI

DESCRIPTION

Model UP9-PN is a self-priming, compact, powerful, 12 or 24 VDC electric gear pump. UP9-PM is constructed of PTFE gears, nickelplated brass body and stainless steel shaft.

Use UP-9PN for fresh water, sea water, diesel fuel, transfer of lightweight lube oils, antifreeze and other compatible media.

SPECIFICATIONS

GENERAL

Ports: Tapped 3/8" BSP, pump supplied with 2 ea 3/8" NPT adaptors
Motor: 12VDC or 24VDC, powdered epoxy coated
Circuit Protection: Install fuse12 V, 15A; 24 V, 10A
Current: See Curves
Flow Rate: See Curves
Self Priming With Wet Gears: 4.92 ft (1.5 m)
Pump Duty:Intermittent
Motor Life: Approx. 2000 hours
Max. Ambient Operating Temperature: 14-140°F (-10-60°C)
Max. Relative Humidity: 90%
Pump Body: Nickel plated Brass
Gears: UP9/Oil, Bronze; UP9/P (PTFE)
Shaft: Stainless Steel
*Suitable Fluid Media:
	Fresh Water (max. 85°C, 185°F), salt water (max.40°C, 
	104°F) & diesel fuel with viscosity between 2 & 5.35 cSt 
	to 37.8°C, 100°F; minimum flashpoint (PM): 55°C, 131°F
Unsuitable Fluid Media: DO NOT USE for gasoline, flammable liquids with PM<131°F, 
	liquids with viscosity>20 cSt, food products, corrosive chemicals & solvents
Weight: 6 lbs

*A model with lower operating speed is available for
lubricating oils and viscous liquids, consult factory.

graphs

DIMENSIONS (INCHES)

dimensions

ORDERING INFORMATION

Order Number:  AB
Example: UP9-PN12V

PLEASE CALL 1-800-253-2497 TO ORDER THIS ITEM
A
Model		 B
Voltage
UP9-PN 12V= 12 VDC
24V= 24 VDC
Note: A 250-400 micron filter is recommended for
applications where the fluid media contains particles.

 

Series UP9-PN Gear Pumps for Water & Diesel Fuel