MARCO

Series UPX-C Stainless Steel Gear Pumps

Water to 3.7 GPM, Oil to 1.5 GPM, Pressure to 29 PSI

DESCRIPTION

Model UPX-C is a self-priming, compact, powerful, 12 or 24 VDC electric gear pump.

Use UPX-C for transfer, circulation or drainage of fluids compatible with AISI316 stainless steel, PTFE and fluoroelastomer seals. UPX-C is resistant to most acid and alkaline solutions. Suitable also for transfer of battery acid.

The UPX-C measures a mere 5 3/8” in length and fits easily in the tightest of spaces.

SPECIFICATIONS

GENERAL

Ports: Tapped 3/8" NPT
Motor: 12VDC or 24VDC, powdered epoxy coated
Circuit Protection: Install fuse, 12 V, 10A; 24 V, 5A
Current: See Curves
Flow Rate: See Curves
Self Priming With Wet Gears: 4.92 ft (1.5 m)
Pump Duty: Intermittent
Motor Life: Approx. 2000 hours
Max. Ambient Operating Temperature: 14-140°F (-10-60°C)
Max. Relative Humidity: 90%
Pump Body: Stainless steel
Gears: (PTFE)
Shaft: AISI 316 Stainless Steel
Seal: Perfluoroelastomer
Suitable Fluid Media: Fresh water and fluids (max. 40°C, 104°F), 
	which are compatible with stainless steel, PTFE and perfluoroelastomer seals.
Unsuitable Fluid Media (UP2/Oil & UP2-P): DO NOT USE for gasoline, flammable 
	liquids with PM<131°F, liquids with viscosity>20 cSt, food products,
	media not compatible with wetted materials.

DIMENSIONS (INCHES)

ORDERING INFORMATION

PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS
Model	Voltage
UPX-C-12V	12 VDC
UPX-C-24V	24 VDC
Note: A 250-400 micron filter is recommended for applications where the fluid media contains particles