INSTRUMENTATION > FLOW > CFS150 Series Piston Type Switch

CLARK SOLUTIONS

CFS150 Series Piston Type Switch

Low Pressure Drop, Liquid Flow rates from 0.5 GPM to 5 GPM

DESCRIPTION

These slim, inline switches reduce pressure drop to a minimum. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimize flow constriction. Liquids are able to smoothly pass around the piston and flow through the switch with little pressure loss to the down stream line.

Click here for information on our other flow switches.

SPECIFICATIONS

Wetted Materials:
     Housing: Polypropylene, Hydrolytically Stable, Glass Reinforced
     Piston: Ryton®-R4, 316 Stainless Steel
     O-Ring: Viton®
     Spring: 316 Stainless Steel
Max. Operating Pressure:
     200 PSIG @+70°F to +150°F (+21.1°C to 65.5°C)
     150 PSIG @+150°F to +212°F (+65.5°C to +100°C)
Operating Temperature: 0°F to 212°F (-17.8°C to +100°C)
Set Point Accuracy: ±15%
Set Point Differential: 20% Maximum
Switch: SPST, Normally Open, 20 VA


  

    
      Switch
      Rating, Maximum Resistive Load
  

  

    
      VA
    
      Volts
    
      Amps AC
    
      Amps DC
  

  

    
      20
    
      0-30
    
      0.4
    
      0.3
  

  

    
      120
    
      0.17
    
      0.13
  

  

    
      240
    
      0.08
    
      0.06
  


Inlet/Outlet Ports: 1/2" NPT Male
Electrical Termination: 1/4" Male Quick 
     Connect Terminals (2)

DIMENSIONS- INCHES (MM)

     Piston Type Inline Flow Switch Dimensions
     Piston Type Inline Flow Switch Typical Pressure Drop

 ORDERING INFORMATION
 

  
					

						PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS
					

					

    
      Model
      CFS150
  

  

    
						Part Numbers Normally Open @ No Flow
						
    
						Flow Setting GPM
						
  

  

    
						C129660
						
    
						0.5
						
  

  

    
						C129661
						
    
						1.0
						
  

  

    
						C129662
						
    
						2.0
						
  

  

    
						C129663
						
    
						3.0
						
  

  

    
						C129664
						
    
						4.0
						
  

  

    
						C129665
						
    
						5.0
						
  




Notes:
1) Flow settings are calibrated using water @ +70°F on increasing flow, 
     with units in a horizontal position (terminals up).
2) Care should be taken by specifiers to ensure fluid compatibility with 
     the above listed wetted materials.
3) Use of 150 micron filtration is recommended.