CFT110 hall effect turbine flow sensor is economical and ideal for OEM applications involving low flow liquid monitoring.
The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor's standard power and output specifications make it easy to retrofit to existing controllers.
Click here for information on our other flow sensors.
Wetted Materials:
Body: Nylon 12
Turbine: Nylon 12 Composite
Bearings: PTFE/15% Graphite
Operating Pressure: 200 PSIG
Burst Pressure: 2500 PSIG
Operating Temperature: -4°F to 212°F (-20°C to 100°C)
Viscosity: 32 to 81 SSU (0.8 to 16 Centistokes)
Filter: <50 Microns
Input Power: 5 to 24 VDC @ 8mA
Output (Hz): NPN Sinking Open Collector @ 50mA Maximum
(1 to 2.2K Ohm Pull-Up Resistor Required)
Accuracy: ±3% of Reading
Repeatability: 0.5% of Full Scale
Electrical Connection: Spade Terminals
0.110"/0.248" x 0.031" (2.8/6.3 x 0.8 mm) or 3 ft. cable
Inlet/Outlet Ports: 3/8" NPT Male
DIMENSIONS-INCHES (MM)
WIRING

| A, P/N | B, P/N |
| 173931 | 173934 |
| 173932 | 173935 |
| 173933 |
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE, OR PLEASE CALL 1-800-253-2497 TO ORDER | |||||
| Part Number | Flow Range | Pulses Per | Frequency Output | ||
| Liters/m | GPM | Gallon | Liter | ||
| C173931 | 0.5-5 | 0.13-1.3 | 26,100 | 6900 | 58-575 Hz |
| C173932 | 1-10 | 0.26-2.6 | 12,500 | 3300 | 58-550 Hz |
| C173933 | 1-15 | 0.26-4.0 | 17,400 | 4600 | 769-1,150 Hz |
| C173934 | 1-15 | 0.26-4.0 | 8,300 | 2200 | 37-550 Hz |
| C173935 | 2-30 | 0.53-7.9 | 3,800 | 1000 | 33-500 Hz |
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE, OR PLEASE CALL 1-800-253-2497 TO ORDER | |
| Part Number | Description |
| C173941 | Mating connector w/3 ft, 3 conductor, PVC pigtail cable |
| C173942 | Mating connector w/10 ft, 3 conductor, PVC pigtail cable |
|
|
|
||||||||||||||||||