MG Gear Pump with Brushless DC Motor
0 to 210 LPH, Pressure to 5 bar
DESCRIPTION The MG200 Series Gear Pumps are compact precision performance products for high technology applications. The magnet drive principle provides a totally sealed pump chamber that is capable of handling a wide range of corrosive liquids with a high degree of safety. The housing of the pump and the internal metal parts are AISI 316 stainless steel. The MG Gear Pump gears are in PTFE or PEEK.
In operation, the MG 200 Series gear pumps are noiseless, pulsation-free and capable of handling relatively hot liquids, i.e., 120°C (248°F) at a low coefficient of expansion. The principle of the magnet drive comprises an inner PEEK encapsulated magnet embodied in the pump, connected to the driving gear, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the magnets provides the driving motion to the pump. Decoupling occurs when the pump load exceeds the coupling torque between the magnets.
In/Out ports have 1/8” NPT female threads. A built-in relief valve is available upon request. The unit is supplied with a 24 Volt brushless DC motor and Variotronic speed control system.
TYPICAL APPLICATIONS • Medical equipment & lab instruments
• Lubrication
• Sampling
• Cooling systems & lasers
• Ink-jet printing systems
MGBR1 (Motor Assembly)
Nom. Voltage
24 VDC
Voltage Range
10-30 VDC
Nom. Speed
6000 RPM
Nom. Torque
56 mNm
Nom. Current
2.8 A
Nom. Output Power
35 W
The Variotronic is a compact electronic drive for operating brushless, electrically commutated direct current motors.
Speed is set via a command voltage of 0-10 V. A speed controller compares the command voltage with the actual speed value and preset PI control settings adjust the motor speed.
ORDERING INFORMATION 1) Order motor assembly separately- MGBR1 2) Build Pump Part Number From Table - EXAMPLE: MG209XPB17
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
