General Purpose Solenoid Valve

Technical Bulletin, General Industry Solenoid Valves
Installation and Troubleshooting

KSV 2-Way Economical 2-way valve
12V or 24V, 5mm orifice

KSV3 3Way Economical 3-way valve
12V or 24V, 5 or 10 mm orifice

Model 1314, 2-Way, Normally Closed Solenoid Valve
3/4” to 2" Pipe Size, Piloted and Partially Piloted Operation

Model 1323, 3-Way Solenoid Valve
1/4” Pipe Size, Direct Acting Solenoid

Model 1325, 3-Way Solenoid Valve
3/8”, 1/2”, 3/4” Pipe Size, Pilot Operated

Model 1327, 2-Way, NC or NO Solenoid Valve
1/4” Pipe Size, Direct Acting Solenoid

Model 1335, 2-Way, NC or NO Solenoid Valve
3/8" to 3/4” Pipe Size, Piloted, Combined & Direct Acting Solenoid

Model 1342, 2-Way, NC or NO Solenoid Valve
3/4", 1", 1 1/2", 2", 2 1/2", & 3” Pipe Size, Pilot Operated

Model 1359 Y Strainer
General Purpose, Particle Retention From 100 Microns

Model 1365, 3-Way Solenoid Valve
1/4” Pipe Size, Direct Acting Solenoid

Model 1390, 2-Way, NC or NO Solenoid Valve
1/4", 3/8" & 1/2" Pipe Size, Pilot Operated

Model 1393, 2-Way, NC or NO Solenoid Valve
1/4", 3/8", 1/2" Pipe Size, Direct Acting Solenoid for Steam and Hot Fluids

Model 2026, 2-Way, Normally Closed Solenoid Valve
1/8” & 1/4" Pipe Size, Direct Acting Solenoid

Model 2036, 2-Way, Normally Closed Solenoid Valve
3/8”, 1/2", 3/4" & 1" Pipe Size, Pilot Operated

Model 2073, 2-Way, NC Solenoid or Pneumatic Valve
3/4”, 1”, 1 1/2” For Dust Collector Reverse Pulse Applications

Clark Solutions provides solenoid valves and solenoid valve products for a range of industrial and OEM applications. Solenoid valve models include:

Economical Solenoid Valve
Model series KSV solenoid valves offer great performance in a very economical design. This product is best suited for OEM applications where the valve performance is acceptable and where low component cost is necessary.

Model 1314, 2-Way, Normally Closed Solenoid Valve
The Model 1314 two-way normally closed solenoid valve is available in bronze, 304 or 316 stainless steel bodies. A variety of seal and seat material including Acrylo-Nitrile, Neoprene¨, Ethylpropylene, Viton¨, and Teflon¨ satisfy many general industry applications.

Model 1393, 2-Way, NC or NO Solenoid Valve
Model 1393 two-way normally closed and normally open solenoid valves have a forged brass body. Model 1393 Solenoid Valves are suitable for steam and compatible hot fluids. Close off is accomplished with a stainless steel blade type closure on Teflon seats. Unlike conventional valves, the flow passage is straight reducing pressure drop and turbulence.

Model 2073, 2-Way, NC Solenoid or Pneumatic Valve
Model 2073 two-way normally closed solenoid or pneumatic valves are designed for use on dust collection equipment (Bag Houses) to deliver pulses of compressed air to filtering tube sleeves. The air knocks off accumulated media ÒcakeÓ on the filter on a timed basis or on demand via a control loop. The cake falls to a hopper from which it is removed