CLARK LIQUID PUMPS

EDS 035 Miniature Solenoid Diaphragm Pump
160 ml/min; 5 PSI

Boxer Series 3000 Diaphragm Pump
DC Power, Liquids to 5.0 LPM & Gases to 30 LPM

Series 5000 Miniature Diaphragm Liquid Pumps
Chemically Resistant, Vac. to 225 mm Hg, Pressure to 0.7 bar,
Flow to 190 ml/min

Model 7008 Miniature Diaphragm Liquid Pumps
Chemically Resistant, Vac. to 375 mm Hg, Pressure to 1.0 bar,
Flow to 630 ml/min

Model 7039 & 7049 Miniature Diaphragm Liquid Pumps
Adjustable Flow, Vac. to 375 mm Hg, Pressure to 1.0 bar,
Flow to 630 ml/min

Boxer 5100 & 5200 Diaphragm Pumps
19l/min gas flow, 900 ml/min liquid flow

MCP & PKP Series
Inert Dispensing Pumps

PISTON-SOLENOID OPERATED PUMPS

Oscillating Piston Pumps, Principle of Operation

ESX-04 Miniature Piston Pump
Solenoid Operated 83 ml/min; 5.8 PSI

EMX 08 Miniature Piston Pump
2.4 GPH; 11.6 PSI

ELS 10 Miniature Piston Pump

EMS 10 Miniature Piston Pump
2.64 GPH; 14.5 PSI

ET 15 & ET 21 Miniature Piston Pumps
21 GPH; 26 PSI

ET 17 Miniature Piston Pump
26.5 GPH; 29 PSI

EKS 17 Miniature Piston Pump
26.5 GPH; 29 PSI (Plastic)

ET 50, ET 100 & ET 150 Miniature Piston Pumps
17.2 GPH; 200 PSI

Mono Series Pumps, 26 GPH-200 PSI, 120V

EBN 18 Miniature Piston Pump
250 LPH, 27.5 PSI

PD-106 Pump Driver Board For Solenoid Piston Pumps

AIR OPERATED DIAPHRAGM

Pageboy Series SFD Pocket Size Diaphragm Pump
0 - 3 LPM

TD Series PE, PTFE, & Aluminum Air Operated Diaphragm
Drum Pumps 12 LPM - 20 PSI

Tapflo^® Metal Series Air Operated Diaphragm Pump
400 LPM

Tapflo^® PE & PTFE Series Air Operated Diaphragm Pump
400 LPM

Tapflo^® T-Series AISI 316 SS Sanitary Pumps
Flow to 425 LPM, Pressure to 8 Bar

PD-Series Active Pulsation Dampeners
for Air Operated Diaphragm Pumps

BC100 Batch Controller
For Use With Tapflo Air Operated Pumps

Introduction to Peristaltic Pumps

Tubing For Peristaltic Pumps

4000 & 6000 Series Peristaltic Pumps
2-12 Channels, DC Powered, OEM or Electronic
Controlled Dispenser Versions

M025DC Peristaltic Pump
12/24 VDC, flow to 120 ml/min

M025 Peristaltic Pump
For Intermittent Duty Low Cost, AC or DC Powered, to 260 ml/min

M045 Peristaltic Pump
to 60 ml/min

M500 Peristaltic Pump
to 700 ml/min

M1000 Peristaltic Pump
to 768 ml/min

AUEZ Easy Tube Loading Peristaltic Pumps
120 VAC,12 or 24 VDC, flow to 1260 ml/min

M1500 Peristaltic Pump
to 2200 ml/min

M2000 Peristaltic Pump
to 1944 ml/min

M3000 Peristaltic Pump
4.6 L/min

M6000 Peristaltic Pump
11.9 L/min

M8000 Peristaltic Pump
14.7 L/min

K12 Peristaltic Pump
16.8 L/min

K20 Peristaltic Pump
to 20 LPM

EV045 Bench Top Peristaltic Pump
60 ml/min

EV1500 & EV3000 Bench Top Peristaltic Pumps
3850 ml/min

VL3 & V3 Bench Top Peristaltic Pumps
Manual and Remote Control, Flow to 3905 ml/min

ROTARY VANE/IMPELLER PUMPS

Series PA Rotary Vane
Pressure to 200 PSI, Flow to 144 GPH

TM Series Rotary Vane
30-200 LPM, Magnet Drive

TM Series Rotary Vane
30-200 LPM, With Motor

OP-6 Flexible Vane Pump, DC Motor, Oil, Diesel Fuel
Water Transfer, 3.3 GPM, 15 PSI

TMFR Series Magnetic Drive Rotary Vane Pump
AC Power, 4 Speed Selections, Flow to 150 gph, Pressure to 230 PSI

4000 Series Rotary Vane
1000-2400 LPH, 316 SS

CENTRIFUGAL PUMPS

NH-PX-D Series Inert Magnetic Pumps
30 LPM - 6.8 PSI, DC Powered

NH-PX-Series Inert Magnetic Pumps
60 LPM - 8.5 PSI , AC Powered

PI-Z-D Magnet Drive Pumps
1.9 to 5.4 GPM, Discharge Head to 36ft.

AM Series Magnetic Drive Chemical Pumps
Flow Rates to 55 GPM, Pressures to 22 PSI

GEAR PUMPS

Technical Bulletin: Gear Pump Selection Information

Technical Bulletin: Gear Pump
Material Compatibility and Viscosity Conversion

DGM09 DC Magnet Drive Pump
Vectra Housing and Gears, Flow to 140 LPH

DGD09 DC Magnet Drive Pump
Vectra Housing and Gears, Flow to 160 LPH

MG Gear Pump With Brushless DC Motor & Drive
0-210 LPH, 9 Bar

MG Gear Pump
With AC Motor, 0-170 LPH

MG Gear Pump
With DC Motor, 0-190 LPH

MGK200/300 Gear Pumps
With AC Motors, SS, PTFE & Peek Construction, 0-72 GPH, 290 PSI

GP-301 and GP-302 Gear Pump
Liquids to 3.3 GPM, Pressure to 40 PSI, Bi-Directional Flow

GP-602-DC and GP-602-AC
Gear Pumps
with DC or AC Motor, Bi-Directional. 8.5 GPM-40 PSI

Model 00 Rotary Gear Pump
Cast Iron, 0.5 GPM, 300 PSI

B Series Rotary Gear Pump
Particle Tolerant, Cast Iron or Brass, 26.8 GPM, 200 PSI

S Series Rotary Gear Pump
Cast Iron or Stainless Steel, 32 GPM, 200 PSI

S Series Heavy Duty Rotary Gear Pump
Cast Iron, 175 GPM, 300 PSI

53/55 Series Rotary Gear Pump
Cast Iron, 51 GPM, 200 PSI

500 Series Rotary Gear Pump
Cast Iron, 60 GPM, 1000 PSI

700 Series Rotary Gear Pump
Cast Iron, 5 GPM, 2000 PSI

Rotary Gear Pump Accessories

Clark Solutions offers a wide range of pump products including diaphragm pumps, piston pumps, peristaltic pumps, rotary vane, impeller pumps, centrifugal pumps, and gear pumps. Available in a wide variety of sizes and flow rates Clark Solutions diaphragm pumps are available in models ideally suited for transfer of compatible liquid media at low pressures and flow rates. Other diaphragm pump models are ideal for pressure or vacuum applications where low current and reliability are the prime requirements. Additional diaphragm pump models are an excellent choice where flow control, chemical resistance, plastic wetted components, DC power operation and quiet, reliable performance are required.

Clark Solution's oscillating piston pumps are a great solution for low volume liquid pumping applications where small size is a critical factor. This line of pumps also includes the "Quiet Cool" oscillating piston pump, one of a range of new generation self-priming compact piston pumps that embodies design excellence coupled with an impressive performance.

Peristaltic pump models offered by Clark Solutions all operate with the roller and tube assembly creating a movement of liquid through 180 degrees. Other makes of peristaltic pumps would create this movement through 120 degrees but generally in such instances the flow volume is much reduced.

Clark Solutions offers a range of rotary vane pumps and impeller pumps. Magnetic drive rotary vane pump model features include: immediate decoupling upon overload, higher operating efficiency, longer service life, no leaks or contamination, and noiseless operation.

The AM Series Centrifugal Pumps are entirely built with reinforced thermoplastic polymers. Materials for the internal components of these centrifugal pumps include ceramic oxides, HD carbon and fluorinated elastomers. Any fluid contact with metallic pump parts is avoided. These chemical pumps are an excellent choice for small-scale chemical pumping applications The NH Series of centrifugal pumps have an inert pump housing that is isolated from the pump motor.

Clark Solutions provides a wide range of gear pump products. MG 200 Series gear pumps are noiseless, pulsation-free and capable of handling relatively hot liquids, The "MG 200" Series Magnet Drive Gear Pumps are compact precision performance products for high technology applications, Series S pumps are general purpose positive displacement gear pumps and are a good choice for a variety of recirculating, mixing and transfer applications.