 |
|
|
|
|
 |
|
CLARK SOLUTIONS
Model 1365, 3-Way Solenoid Valve
1/4” Pipe Size, Direct Acting Solenoid
DESCRIPTION
Model 1365 three-way solenoid valves are available in brass, iron or 304 stainless steel bodies. A variety of seal and seat materials including Acrylo-Nitrile, Neoprene®, Ethylpropylene and Viton® satisfy many general industry applications.
The valves employ a direct acting solenoid. A choice of solenoids cover a range of ambient temperatures and operating voltages.
Options include weather proof housing, energized coil indicator light and manual override.
SPECIFICATIONS
GENERAL
Operation: 3-way, two position (N.C., N.O.,
divergent, universal)
Valve Body: Brass, AISI 304 stainless steel, iron
Valve Life: > 1,000,000 cycles, field rebuild kits
available
Valve Seals & Seats: Acrylo-Nitrile, Neoprene®,
Ethylpropylene or Viton®
Connections: 1/4” BSP or NPT
Operating Voltage - 12VDC, 24VDC/VAC,
120VAC, 60Hz
Standard Solenoid Housing: Encapsulated,
includes DIN 43650 connector (PG-9)
Connector Wire Connection: Screw terminal
Optional IP65/NEMA4 Weather Proof:
Encapsulated coil,1/2” NPT potted conduit
connection with flying leads
Coil Rating:
Class F coil to 80ºC: AC 60 Hz, 13 W;
DC, 19 W
Class H Coil to 180°C: AC 60 Hz, 13 W
DC, 19 W
Options: Manual operation, weatherproof
housing, energized coil indicator light.
|
|
|
 |
|
|
|
| Table 1 |
| Wetted Materials |
| Body |
Plunger |
Plunger Tower |
Springs |
| Brass |
AISI 430F |
304L or 305 SS |
Copper |
| AISI 304 |
AISI 430F |
304L or 305 SS |
Silver & 302 SS |
|
|
|
|
| Table 2 |
| Seat Material |
Acrylo Nitrile |
Neoprene® |
Ethyl-propylene |
Viton® |
| Maximum Temperature |
+80ºC |
+80ºC |
+150ºC |
+150ºC |
| Uses |
Water, air, light oils, kerosene. Low and medium vacuum. |
Oxygen, alcohol, argon, other non-corrosive light gases and liquids. Freon 12. |
Water steam, hot water, acetone. |
Benzene, naphtha, aromatics, etc.. Hot gases. High vacuum. |
|
|
 |
|
|
| File LR87427 2M - LR108921-1 |
|
|
 |
|
|
| File MH16855 Vol. 2 Sec. 2 |
|
|
|
| Orifice Diameter |
Kv (m3/h |
Max. Differential Pressure (bar) by Configuration |
| N.C. |
N.O. |
DIV. |
CONV. |
| Three-Way, Two Position, "C" Construction, Normally Closed, No Connector at "C" Outlet |
| 1.75 |
0.08 |
15 |
5 |
20 |
5 |
| 2.25 |
0.12 |
8 |
3 |
15 |
3 |
| 3.00 |
0.21 |
4 |
1 |
10 |
1 |
| 4.00 |
0.30 |
2 |
- |
8 |
- |
| Three-Way, Two Position, "A" Construction, Normally Open |
| 1.75 |
0.08 |
7 |
8 |
20 |
7 |
| 2.25 |
0.12 |
5 |
6 |
15 |
5 |
| 3.00 |
0.21 |
3 |
4 |
10 |
3 |
| 4.00 |
0.30 |
1 |
2 |
8 |
1 |
| Three-Way, Two Position, Three-Way, Two Position, "U" Construction, Universal |
| 1.75 |
0.08 |
10 |
7 |
20 |
7 |
| 2.25 |
0.12 |
8 |
5 |
15 |
5 |
| 3.00 |
0.21 |
4 |
3 |
10 |
3 |
| 4.00 |
0.30 |
1.5 |
1.5 |
8 |
1.5 |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
Install in any position, preferably on a horizontal run of pipe with coil upright.
Except “C”, all constructions may be used for any configurations but it is desirable to select the valve according to its use to obtain the best performance.
|
|
|
|
Flow Calculation, Liquids:
Q= Flow Rate, GPM (U.S.A.)
Cv= Valve Flow Coefficient
DP= Valve Pressure Drop, PSID
G= Specific Gravity of Liquid (= 1.0 for Water)
|
|
|
|
 |
|
 |
|
|
|
Standard Coil and DIN43650 Connector |
|
|
Option YC Weather Proof Housing with 1/2” NPT Threaded Conduit Connector |
|
|
|
ORDERING INFORMATION
SELECT ITEM FROM EACH COLUMN IN CHART BELOW
EXAMPLE:1365SV40UTF120AC |
|
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
|
Model
|
Body Material |
Seat & Seal Material |
Orifice Size (mm) |
Configuration (See Above) |
Connection Threads |
Coil Type |
Voltage |
| 1365 |
B= Brass |
A= Acrylo-Nitrile |
17= 1.75 |
U= Universal |
T= NPT |
F=Class F |
12DC= 12VDC |
| S= 304 SS |
V= Viton |
22=2.25 |
H= Class H |
24DC= 24VDC |
| |
|
30= 3.00 |
|
120AC= 120VAC, 60Hz |
| 40= 4.00 |
|
| |
| Options |
| †Prefix YC= Weather Proof Housing |
|
|
|
Show Discount Schedule
|
|
|
|
| OR PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
|
Model
|
Body Material |
Seat & Seal Material |
Orifice Size (mm) |
Configuration (See Above) |
Connection Threads |
Coil Type |
Voltage |
| 1365 |
B= Brass |
A= Acrylo-Nitrile |
17= 1.75 |
U= Universal |
T= NPT |
F=Class F |
12DC= 12VDC |
| S= 304 SS |
V= Viton |
22=2.25 |
C= Normally Open |
- = BSP |
H= Class H |
24DC= 24VDC |
| H= Iron |
N= Neoprene |
30= 3.00 |
A= Normally Closed |
|
|
120AC= 120VAC, 60Hz |
| |
E= Ethylpropylene |
40= 4.00 |
|
24AC= 24VAC, 60Hz |
| |
| Options |
| †Prefix YC= Weather Proof Housing |
| Suffix M= Manual Operation |
| Coil Indicator Light= Consult Factory |
|
|
|
|
INSTALLATION RECOMMENDATIONS
Place a strainer with a porosity < 100µ upstream of valve (see Clark Solutions Model 1359 Y Strainer).
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
