1800 Series Compact Low Differential Pressure Switch
Clark Solutions
1800 Series Compact Low Differential Pressure Switches
Set points from 0.07" to 85" W.C. Repetitive accuracy within 2%.

DESCRIPTION
One of our most popular pressure switches. Combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting spud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. U.L. and C.S.A. listed, F.M and CENELEC approved.

SPECIFICATIONS
Temperature Limits: -30°F (-34°C) for dry air or gas to 180°F
    (82°C). 1823-00, -20 to 180°F (-29 to 82°C).
Maximum surge pressure: 25 psig (1.7bar).
Rated pressure: 10 psig (0.7 bar).
Pressure connections: 1/8" NPT
Electrical rating: 15 amps, 120- 480 volts, 60 Hz. AC. Resistive 1/8
    H.P. @125 volts,1/4 H.P. @ 250 volts,60Hz A.C. Derate to 10 amps
    for operation at high cycle rates.
Wiring connections: 3 screw type, common, normally open and
    normally closed.
Set point adjustment: Screw type inside mounting spud.
Housing: Aluminum die casting. Steel fittings zinc plated, dichromate
    dipped for 200 hour salt spray test.
Diaphragm: Molded silicone rubber with aluminum support plate.
Calibration Spring: Stainless Steel.
Mounting spud:1/2" pipe thread.
Weight: 1 lb., 5 oz. (596g)
Installation: Diaphragm vertical.

SPECIAL MODELS AND ACCESSORIES

No. A-389 Mounting bracket is 16 ga. steel, zinc plated and dichromate dipped for corrosion resistance. Provides rugged, permanent mounting and speeds installation.

MIL Environmental Construction - Unlisted Model 1820 can be furnished with a special sealed snap switch for protection against high humidity, fungus and/or military applications. Similar to Model 1823 except dead band is slightly greater and some lower setpoints may not be possible. To order, add suffix -MIL.
Example: 1820-2-MIL.

Weatherproof Housing 16 ga. steel enclosure with gasketed cover (NEMA 4) for wet or oily conditions. Withstands 200 hour salt spray test. Wt. 5 1/2 Ibs. (2.5 kg). Switch must be factory installed. Change 1823 base number to 1824 and add -WP suffix.
Example: 1824-1-WP

Explosion-Proof Housing Cast iron base with aluminum cover. Rated Class I, Div. 1 & 2, Groups C, D; Class II, Div. 1 & 2, Groups E, F, G; Class III and NEMA 7 CD, 9 EFG. Wt. 7 1/2 Ibs. (3.4kg). Switch must be factory installed.Change base number to 1824 and add -EXPL suffix.
Example: 1824-1-EXPL

ORDERING INFORMATION
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
OR PLEASE CALL 1-800-253-2497 TO ORDER
Model Operating Range, in w.c.  Approximate Dead Band
Min Set Max Set
1823-00 0.07 to 0.22 0.05 0.05
1823-0 0.15 to 0.5 0.06 0.06
1823-1  0.3 to 1.0 0.08 0.08
1823-2  0.5 to 2.0 0.10 0.12
1823-5 1.5 to 5.0 0.14 0.28
1823-10  2.0 to 10 0.18 0.45
1823-20 3 to 22 0.35 0.70
1823-40   5 to 44 0.56 1.10
1823-80   9 to 85 1.30 3.0

Qty:

Show Discount Schedule

For assistance call 978-568-3400

pumps | valves | instrumentation | new products | contact clark | site/product directory | enewsletter | home