DESCRIPTION
Model 2073 two-way normally closed valves are designed for use on dust collection equipment (Bag Houses) to deliver pulses of compressed air to filtering tube sleeves. The air knocks off accumulated media “cake” on the filter on a timed basis or on demand via a control loop. The cake falls to a hopper from which it is removed.

The valves employ a choice of solenoid or pneumatic valve operation.  The valves have a high flow rate and fast response time.

Model 2073 valves have injected or cast aluminum bodies and a choice of Acrylo-Nitrile or Hytrel diaphragm materials. NEMA 4 weatherproof coil construction is optional.

SPECIFICATIONS
GENERAL
Operation: Normally closed
Valve Body : Injected or cast aluminum
Valve Life: > 1,000,000 cycles, field rebuild kits
       available
Response time: 50-100 ms (typical)
Plunger & Plunger Tower: Stainless steel
Valve Seals & Seats: Acrylo-Nitrile, Hytrel
Connections: 3/4”, 1”, 1 1/2” BSP or NPT
Operating Voltage: 12VDC, 24VDC/VAC,
       120VAC, 60Hz
Standard Solenoid Housing: Encapsulated,
       includes DIN 43650 connector (PG-9)
Wire Connection: Screw terminal
Optional IP65/NEMA4 Weather Proof:
       Encapsulated coil,1/2” NPT potted conduit
       connection with flying leads
Coil Rating: 
       Class F coil to 80°C: AC 60 Hz, 13 W;
          DC, 19 W
       Class H coil to 180°C: AC 60 Hz, 13 W;
          DC, 19 W
Options: Weatherproof housing