511 Series Low Cost Pressure Transmitter

511 Series Low Cost Pressure Transmitter
Liquids And Gases, FS Ranges 30" Hg Vacuum to 7500 PSI

DESCRIPTION
These compact Low Cost pressure transmitters meet the highest specification for mechanical stress, EMC compatibility, and operational reliability.

Model 511 is particularly suitable for demanding industrial applications. The sensor utilizes a ceramic technology developed by Huba Control of Switzerland. Millions sold over the past 10 years demonstrate the reliability of the ceramic sensor design that utilizes integrated (to the sensor) electronics.

The integrated sensor/electronic design has a high degree of accuracy over wide temperature range.

* HIGH RESISTANCE TO EXTREME TEMPERATURE
* COMPACT, RUGGED CONSTRUCTION
* PATENTED RUPTURE SEALING DEVICE IN
CONNECTOR
* PREVENTS MEDIA LEAKAGE IN EVENT OF
SENSOR FAILURE
*ATTRACTIVE PRICE TO PERFORMANCE RATIO

SPECIFICATIONS
Pressure Measurement: Absolute pressure & gage pressure (differential
            measurement of pressure relative to ambient pressure).
F.S. Pressure Ranges: -1 to 600 bar (-14.5 to 8700 PSI)
Maximum/Rupture Pressure:
            3.0x Full scale at - 1 … 4 bar
            2.5x Full scale at 6 … 400 bar
            2.0x Full scale at 600 bar
            Higher rupture pressure on request
            A patented media stop system prevents media egress when
            exceeding rupture pressure range (40 bar nominal value)
Accuracy:
            Total of linearity, hysteresis and repeatability: < +/- 0.3% fs
            Adjustment accuracy zero point and full scale: < +/- 0.3% fs
Casing: Stainless steel 1.4305 (AISI 303)
Materials In Contact With The Medium:
            Ceramic Al₂O₃
            Stainless steel 1.4305 (AISI 303)
            Rupture Seal: PPS
            Seal Material:FPM, NBR, others on request
Media Temperature With Sealing Materials:
            FPM - 15 … + 125°C
            NBR - 25 … + 85°C
            FPM SPEC. - 40 … + 150°C
Ambient Temperature: Max. 85 °C
            (Versions up to 150°C on request)
Temperature Influences:
            Zero < +/- 0.015% fs/°C
            Span < +/- 0.015% fs/°C
            Temperature range - 40 … + 125 °C
Dynamic Response: Suitable for static and dynamic measurements.
            Response time < 2 ms, typ. 1 ms
Pressure Connections: See order code selection table
Weight: Version inside thread 85 grams
              Version outside thread 95 grams
Installation Orientation: Unrestricted
Signal/Power Supply: See order code selection table
Protection: Short circuit-proof and protected against polarity reversal.
            Each connection is protected against other with max. +/- supply
            voltage.
Electric strength 500 VDC, on request 1000 VDC
Load:
            Voltage outputs: > 10 kOhm / < 100 nF
            Current Output: Max 1250 Ohms
            Current Consumption With Max. Signal Output:
            Voltage outputs: < 4 mA
            4 - 20 mA: < 20 mA
Electrical connections : M12 x 1 or cable, 1.5 meters (other connectors
            available on request)

TESTING

Shock according to IEC 68-2-27: 75 G, 11 ms half sine wave, all 3 directions. Free fall from 1 m on concrete (6x).
Constant shock according to IEC 68-2-29: 40 G for 6 ms, 1000x all 3 directions.
Vibration according to IEC 68-2-6: 20 G, 9 ... 200 Hz, 2 ... 9 Hz with amplit +/- 15 mm, 1 Octave / min.all 3 directions, 50 constant load.
Electromagnetic compatibility: CE conformity (EMC) by application of harmonized standards: Interference stability EN 50082-2, IEC 61000-6-2 and EN 61326-1, interference emit EN 50081-1, EN 55022, CISPR 22, EN 61326-1
Interference Stability	Test Standard	Effects
Electrostatic discharge (ESD)	EN 61000-4-2	No effect
	15 kV air discharge, 8 kV contact discharge
High-frequency electromagnet radiation (HF)	EN 61000-4-3	No effect
	200 V/m, 80 ... 1000 Mz
Conducted HF interference	EN 61000-4-6	No effect
	30 V, 0.15 ... 80 MHz
Fast transients (burst)	EN 61000-4-4	No effect
	4 kV
Surge	EN 61000-4-5	No failure
	Line-Line, Line-Case 500 V, 12 Ohm, 9 µF
	1 kV, 42 Ohm, 0.5 µF
Magnetic fields	EN 61000-4-8	No effect
	30 A/m, 50 Hz
Insulation voltage	500 VDC (optional 1000 VDC)	No effect
	350 VAC (optional 700 VAC)
Interference Emit	Test Standard	Effects
	EN 55022
Conducted interference	0.15... 30 MHz	No emission
Radiation from housing	30...1000 MHz, 10 meters	No emission

ORDERING INFORMATION
MODEL NUMBER ABCDEFGH
Example: 511-9A1003031

FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
A=Model	B=Type	*C=Range	D=Seals	E=Output	F=Elect. Connections	G=Press. Connections	H=Connection Orifice
511	9=Gage pressure	A1= 0 to 30?Hg Vacuum	00=FPM	3=4-20 mA (2-wire, 8-33VDC)	0=1.5 Meter Cable	3= 1/4-18 NPT	1=Without (ranges to 300 psi)
		B1= 0 to 15 PSI
		B4= 0 to 30 PSI					2=With (ranges 500psi and greater)
		B5= 0 to 60 PSI
		B7= 0 to 100 PSI
		C1= 0 to 200 PSI
		C2= 0 to 300 PSI
		C3= 0 to 500 PSI
		D0= 0 to 1000 PSI
		D2= 0 to 2000 PSI
		D3= 0 to 3000 PSI
* Ranges in other units of pressure such as bar are available. Special ranges available on request.
Consult us with special requirements
BOLD ITEMS ARE TYPICALLY IN STOCK (2-3 week delivery for non-stock items)

Show Discount Schedule

PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS
A=Model	B=Type	*C=Range	D=Seals	E=Output	F=Elect. Connections	G=Press. Connections	H=Connection Orifice
511	9=Gage pressure	A1= 0 to 30?Hg Vacuum	00=FPM	3=4-20 mA (2-wire, 8-33VDC)	0=1.5 Meter Cable	3= 1/4-18 NPT	1=Without (ranges to 300 psi)
	8=Absolute pressure	B1= 0 to 15 PSI	20=NBR	1= 0-5 V	1=M12 x 1 (without female connector)	6= 1/8-27 NPT	2=With (ranges 500psi and greater)
		B4= 0 to 30 PSI	60=FPM SPEC	2= 0-10 V (3-wire, 8-33VDC)		1=G1/4 female
		B5= 0 to 60 PSI				5= M12 x 1.5 male
		B7= 0 to 100 PSI				6= M14 x 1.5 male
		C1= 0 to 200 PSI
		C2= 0 to 300 PSI
		C3= 0 to 500 PSI
		D0= 0 to 1000 PSI
		D2= 0 to 2000 PSI
		D3= 0 to 3000 PSI
		E46= 0 to 5000 PSI (FPM SPEC seal only)
		E56= 0-7500 PSI (FPM SPEC seal only)

Accessories & Options:
106975=Female connector for M12 x 1
Packaging:
Single=Single Package for each transmitter
Multiple=Packaged in 25 piece lots

* Ranges in other units of pressure such as bar are available. Special ranges available on request.
Consult us with special requirements
BOLD ITEMS ARE TYPICALLY IN STOCK (2-3 week delivery for non-stock items)

For assistance call 978-568-3400