AMR ALMEMO Sensors-Temperature

AMR - ALMEMO SENSORS
Humidity, Temperature, Pressure, Air Velocity,
Conductivity, Gas Concentration

TEMPERATURE

We will be pleased to provide you temperature sensors and can provide a wide range of standard and special probes. We find that many customers/users prefer their own sources of supply for temperature sensors or wish to employ sensors already in place. Our suggestion is therefore:

1. Use your own sensors and connect to our data loggers with an Almemo connector.
2. Use a temperature assembly manufactured by us with an Almemo connector plug.

1) Use your own sensors

Based on the patented idea of the intelligent connector, the Almemo system is a very flexible measuring system. You can use your own, existing sensors.

For that, special Almemo connectors are available, which are already programmed with all necessary data for your sensor. They are equipped with six screw terminals and can be connected easily.

In addition to standard Almemo calibrations and configurations, Almemo connectors can be tailored by the factory to your special sensor needs, measuring ranges and linearizations.

AMR ALMEMO Sensors-Temperature

Standard Almemo Connectors for Thermocouples

Type	Meas. Range (°C)	Resolution	Ordering No.
NiCr-n (K)	-200 to +1370	0.1 k	ZA 9020 FS
NiCr-n (K)	-200 to +1370	0.01 k	ZA 9020 FS2
NiCroSil-NiSil (N)	-200 to +1300	0.1 k	ZA 9020 FSN
Fe-CuNi (L)	-200 to +900	0.1 k	ZA 9000 FSL
Fe-CuNi (J)	-200 to +1000	0.1 k	ZA 9000 FSJ
Cu-CuNi (U)	-200 to +600	0.1 k	ZA 9000 FSU
Cu-CuNi (T)	-200 to +400	0.1 k	ZA 9000 FST
PtRh10-Pt (S)	0 to +1760	0.1 k	ZA 9000 FSS
PtRh13-Pt (R)	0 to +1760	0.1 k	ZA 9000 FSR
PtRh30-PtRh6 (B)	-400 to +1800	0.1 k	ZA 9000 FSB
AuFe-Cr	-270 to +60	0.1 k	ZA 9007 FS

Standard Almemo Connectors for RTD Sensors

Type	Meas. Range (°C)	Resolution	Ordering No.
Pt100 4-wire	-200 to +850	0.1 k	ZA 9030 FS1
Pt100 4-wire	-200 to +400	0.01 k	ZA 9030 FS2
Pt1000 4-wire	-200 to +850	0.1 k	ZA 9030 FS4*
Pt1000 4-wire	-200 to +400	0.01 k	ZA 9030 FS5*
Ni100	-60 to +240	0.1 k	ZA 9030 FS3
Ni1000	-60 to +240	0.1 k	ZA 9030 FS6
* Requires special programming of ALMEMO instruments

2) Use one of our sensors supplied with an Almemo connector

Hand Held Temperature Probes

We manufacture a wide range of fully interchangeable, fast response probes designed to meet today’s customer requirements. Probes with lead length to 100 meters can be manufactured on request.

The following hand held probes are type K thermocouple and supplied with a black, ABS plastic handle, 1 meter PVC lead and a miniature type K Thermocouple connector or Almemo connector.

Typical Part Number:

1 2 3 - 1 6 0 - A

Lead Type	Handle Type	Thermocouple Type	Interface
1=Coiled	2=Hexagonal Handle	1=E	A=Almemo Connector
3=Coiled	3=Round Handle	2=J	T=Thermocouple Connector
		3=K	T=Thermocouple Connector
		4=N

Straight and Coiled Lead

Hexagonal & Straight Handle

Please use the following links to navigate through the Almemo Sensors section.

Humidity, Pressure, Air Velocity, Conductivity, Gas Concentration

For assistance call 978-568-3400