CLARK SOLUTIONS
CV7500 Manual Control Valves Air ranges to 68 LPM, water to 3.55 LPM
DESCRIPTION CV7500 control valves are for low flow OEM, laboratory instrumentation, or bench top flow control applications. The valve designs and material make them suitable for use with a variety of gases and fluids. Complete valves are available in straight through or 90 degree angle body configurations and are constructed of brass or stainless steel. All valves are supplied with 1/8" FNPT inlet and outlet ports.
The economical cartridge valve (CVS) is available in three different needle tapers which cover our entire flow range. These units have a rising stem and provide nine turns from closed to full open.
The precision control valve (CVP) features a non-rising stem and is available in six different needle tapers, for fine control of very low flows. This valve offers sixteen turns from closed to full open. Its design eliminates saw-toothing and is virtually hysteresis free. All materials are matched for similar coefficients of expansion.
FEATURES · All designs are panel-mountable
· Positive shutoff
· Straight-through (180°) or right angle (90°) flow
paths
· Interchangeable needle tapers
· 316 stainless steel or brass
· Flow ranges from 5 CCM to 68 LPM of air
· Standard valve 9 turns to full open
· Precision valve 16 turns to full open
CVS Standard Control Valve
CVP Precision Control Valve
Standard & Precision Valve Cartridge
MATERIALS OF CONSTRUCTION
Body Materials
Valve Stem
Seals
Orifice
Max. Temp
Max.Pressure
Nickel Plated Brass
316 Stainless Steel
Nitrille
316 Stainless Steel
130° F
250 PSIG
316 Stainless Steel
316 Stainless Steel
Fluorocarbon
Kel-F
250° F
250 PSIG
PRECISION VALVE (CVP)
MODEL NUMBER
TAPER SIZE
MAXIMUM FLOW CCM**
AIR
WATER
CV
CVP
1
253
17
.0006
CVP
2
470
28
.0011
CVP
3
1100
74
.0029
CVP
4
3800
219
.0110
CVP
5
11900
722
.0328
CVP
6
21300
1255
.0494
CVP
7
44000
1335
0.107
CVP
8
66000
2080
0.133
STANDARD VALVE (CVS)
MODEL NUMBER
TAPER SIZE
MAXIMUM FLOW CCM**
AIR
WATER
CV
CVS
1
13000
760
.0320
CVS
2
46000
2150
.0912
CVS
3
68000
3550
.1653
**Based on 10 psig inlet pressure of air, exhausting to atmosphere.
DIMENSIONS (INCHES)
PRECISION CONTROL VALVES
STANDARD CONTROL VALVES (CVS)
ORDERING INFORMATION ORDER NUMBER ABCDE
EXAMPLE CVPS2S
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
