 |
|
|
|
|
 |
|
Clark Solutions
DM01D Compact Magnetic Inductive Flow Transmitter
F.S. Liquid Flow Ranges from 100 ml/min to 200 l/min
DESCRIPTION
The compact magnetic inductive flowmeter model DM01D works without moving parts. It is designed especially for low flow rates and tight mounting conditions. Full scale ranges from 100 ml/min to 200 l/min are available.
The magnetic inductive flow meter works according to Faraday’s law of induction. The liquid to be measured, (which must be electrically conductive), flows perpendicular to a magnetic field. This induces a voltage in the liquid. This voltage is picked up by means of two electrodes located in the measuring tube. The voltage is fed to a signal conditioning circuit that converts it to a square wave frequency output.
DM01D has no moving parts, therefore no maintenance and no wear and tear. There are no parts obstructing the flow in the measuring pipe and under normal operating conditions, no influence on the output of temperature, viscosity, concentration or pressure changes. A high turndown ratio (up to 50:1) expands the device application. Particles in the medium and viscous or polluted media may be measured without problems.
SPECIFICATIONS
Wetted Parts: measuring tube and
electrodes, stainless steel; process
connections, Delrin or PVDF
Max. Pressure: 6 bar
Medium Temperature: -10 to +40ºC
Max. Inaccuracy: +/- 1.5% of actual
value
Min. Conductivity: 20 µS/cm
Supply Voltage: 24 VDC +/- 10%
Max Current Consumption: 50 mA
Output Signal: flow proportional
frequency, square wave
Electrical Protection: IP 65
|
|
|
DM01D
|
|
|
 |
|
|
 |
|
| Table 1 |
|
|
|
| measuring range (l/min) |
width x height (mm) |
dia. of measuring tube (mm) |
process conn. |
K-factor
(pulses per liter) |
| 0.1...5 |
84.5 x 123 |
8 |
*G 1/2 AG |
1000 |
| 0.2...20 |
84.5 x 123 |
8 |
*G 1/2 AG |
800 |
| 0.5...50 |
90 x 123 |
14 |
*G 3/4 AG |
400 |
| 1...100 |
90 x 123 |
18 |
*G 1 AG |
200 |
| 2...200 |
90 x 123 |
18 |
*G 1 AG |
100 |
| *Note- PP female to male NPT adapters are available (1/2", 3/4" & 1") |
|
|
ORDERING INFORMATION
ORDER NUMBER ABCD
EXAMPLE: DM01D-03DN
|
|
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| A=Model |
B=Range (l.min) |
C=Connection Material |
D=Connection |
| DM01D |
01 = 0.1...5 |
D= Delrin |
*N = Female to Male NPT PP Adapter Supplied |
| 02 = 1...20 |
| 03 = 2...50 |
| 04 = 5...100 |
| 05 = 10...200 |
| * Ranges 01 & 02, 1/2" NPT; Range 03, 3/4" NPT; Ranges 04 & 05, 1"NPT |
|
|
|
Show Discount Schedule
|
|
|
| OR PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| A=Model |
B=Range (l.min) |
C=Connection Material |
D=Connection |
| DM01D |
01 = 0.1...5 |
D= Delrin |
*N = Female to Male NPT PP Adapter Supplied |
| 02 = 1...20 |
P= PVDF |
| 03 = 2...50 |
|
M = Metric per Table 1 |
| 04 = 5...100 |
|
| 05 = 10...200 |
| * Ranges 01 & 02, 1/2" NPT; Range 03, 3/4" NPT; Ranges 04 & 05, 1"NPT |
|
|
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
|
|
|
|
|
