|
|
|
|
|
|
|
 |
CLARK SOLUTIONS
DS15 Flow Indicator, Switch, Transmitter
F.S. Flow Ranges from 24 lph to 50,000 lph Water
DESCRIPTION
The model DS15 flow meters work according to the proven variable area principle. The float is moved upward in a tapered tube by the flowing medium and its upper edge indicates the flow rate by means of a scale affixed on to the measuring tube.
By using a float with an integrated magnet, optional alarm contacts or an analog output transducer may be added.
All flow meters have a male thread on the measuring tube and are supplied with two schedule 80 PVC-U pipe couplings. Please call for coupling materials other than PVC .
The variety of materials used and the simple to exchange measuring scales make these meters universally suitable for most liquid and gaseous media.
Applications are in the water treatment industry, wastewater, plating and surface finishing, chemical and food industries and many more.
|
|
 |
|
SPECIFICATIONS
Measuring Tube Material - PVC-U transparent, Polyamide, Polysulfone
or PVDF (for use with alarm contacts or analog output
transducer only)
Float Material - PVDF, optionally st. steel AISI 304 and PVDF with
integrated magnet
O-Rings - EPDM, Viton optional
Pipe Connections - PVC, optionally PP, PVDF
Max Pressure - 10 bar @ 20°C
Max Temperature Flow Tube Only -
PVC: 60°C
Polyamide: 75°C
Polysulfone: 100°C
PVDF: 110°C
Max Temperature with connectors made of:
PVC: 60°C
PP: 80°C Max
PVDF:110°C
Mounting Position - vertically, flow from bottom to top
Mounting - with straight pipe, 5-7 x pipe dia. upstream and
downstream of meter F
Measuring Accuracy - ±4% F.S.
Scales - water scales (in LPH) and air scales (in m^(3)/h) referenced
to 0, 1, 2, or 3 bar above atmosphere and 20°C are standard.
For other media, i.e. gases with higher pressures, HCL (30%),
NaOH (30%) as well as other units of measurement
(m^(3)/h, l/sec, GPM) special scales can be supplied.
Accessories
Alarm Contacts - bistable, N/C or N/O contact function on rising flow
Mounting: adjustable on measuring tube
Contact Rating: Max 220 VAC, 0.5A Max 10A/10VA
Operating Temperature: 0...+55°C
Hysteresis: 3 mm of float height
Electrical Connection: Two wire, independent of polarity
Analog & RS-232 output -
The optional analog output transducer is mounted onto the
measuring tube of the DS15 flowmeter and registers the height of
the float by means of an analog Hall sensor. The integrated
electronics converts this signal to a 4-20 mA output. Additionally a
digital value is available via an RS-232 interface.
To utilize the analog output transducer, the standard float must
be exchanged for a float with an integral magnet.
The transducer is equipped with an EPROM which is programmed
especially for the application. Therefore it is not possible to
field adjust the transducers without consulting the manufacturer.
Electrical connection: 6-pin plug per DIN 45322 (included) |
|
|
|
 |
|
|
| Electrical Connection For RS-232 |
| Interface- 9 Pin Sub-D-Connector |
| Transducer |
Sub-D-Connector |
| Pin 2 (GND) |
Pin 5 (GND) |
| Pin 5 (TxD) |
Pin 2 (RxD) |
| Pin 6 (RxD) |
Pin 3 (TxD) |
| Data Format- 9600 baud, 8 data bits, 1 stop bit, no parity |
|
|
| Table 1: Measuring Ranges |
| Tube |
Range Number |
Range l/h water |
Range Air m3/h Outlet Atmospheric |
Range Air m3/h Outlet 1bar |
Range Air m3/h Outlet 2 bar |
Range Air m3/h Outlet 3 bar |
| 1 |
101 |
3-24 |
0.2-1 |
0.2-1.2 |
0.25-1.55 |
0.3-1.75 |
| 102 |
5-60 |
0.2-2.5 |
0.4-3.2 |
0.2-3.8 |
0.3-4.4 |
| 103 |
10-100 |
0.6-3.6 |
0.6-5.0 |
0.75-6.0 |
0.8-7.0 |
| 104 |
25-250 |
0.5-9.0 |
1.0-13.0 |
1.0-16.0 |
1.5-19.5 |
| 2 |
201 |
5-50 |
0.4-2.8 |
0.2-3.2 |
0.4-3.6 |
0.3-4.0 |
| 202 |
15-150 |
0.8-6.2 |
1.0-9.0 |
1.0-11.0 |
1.5-12.0 |
| 203 |
5-250 |
0.9-9.5 |
1.0-13.0 |
1.0-16.0 |
2.0-20.0 |
| 204 |
40-400 |
2.0-15.0 |
2.0-20.0 |
3.0-26.0 |
3.0-30.0 |
| 3 |
301 |
15-150 |
0.5-5.5 |
1.0-9.0 |
1.0-11.0 |
1.0-10.5 |
| 302 |
40-400 |
2.0-14.0 |
2.0-20.0 |
3.0-26.0 |
3.0-30.0 |
| 303 |
60-600 |
2.5-22.0 |
4.0-31.0 |
4.0-38.0 |
5.0-45.0 |
| 304 |
100-1000 |
4.0-34.0 |
5.0-45.0 |
6.0-58.0 |
7.5-67.5 |
| 4 |
401 |
25-250 |
1.0-8.0 |
1.5-13.0 |
1.5-16.0 |
1.5-19.5 |
| 402 |
40-400 |
2.0-14.0 |
2.0-20.0 |
3.0-26.0 |
3.0-30.0 |
| 403 |
100-1000 |
4.0-34.0 |
5.0-45.0 |
5.0-55.0 |
6.0-66.0 |
| 404 |
150-1500 |
5.0-50.0 |
6.0-70.0 |
7.5-86.0 |
7.5-98.0 |
| 6 |
601 |
15-150 |
0.7-5.5 |
1-7.5 |
1-9 |
1.6-10 |
| 602 |
30-300 |
1-10 |
1.5-14 |
2-18 |
2.8-20 |
| 603 |
60-600 |
2.5-20 |
3.5-28 |
4-35 |
5-40 |
| 604 |
100-1000 |
4-34 |
5-50 |
8-60 |
8-70 |
| 605 |
150-1500 |
5-50 |
7.5-67 |
9.5-83 |
11-96 |
| 606 |
250-2500 |
8.5-76 |
10-115 |
14-131 |
17-152 |
| 607 |
400-4000 |
14-125 |
10-170 |
24-210 |
28-245 |
| 608 |
600-6000 |
22-190 |
30-260 |
40-380 |
40-400 |
| 609 |
1000-10000 |
35-300 |
50-420 |
60-510 |
70-600 |
| 610 |
1500-15000 |
50-500 |
80-700 |
85-760 |
102-880 |
| 611 |
2500-25000 |
80-720 |
115-1050 |
140-1240 |
166-1400 |
| 612 |
10000-50000 |
400-1500 |
500-2100 |
600-2500 |
700-2900 |
|
Note: Arbitrary scales and other units of measurement available on request
|
|
|
|
Conversion Factors
For GPH: Multiply l/h by 0.264
For GPM: Divide l/h by 227
For SCFH: Multiply m³/h by 35.315
For SCFM: Multiply m³/h by 0.5886
|
|
|
|
|
|
 |
|
| DIMENSIONS (MM) |
|
|
| Table 2: Dimensions |
| Tube |
Range Number |
Flow Tube Male Thread (BSP) |
*PVC Pipe Adapter |
L |
L1 |
**d |
**DN |
| 1 |
101...104 |
3/4" |
3/8" |
165 |
171 |
16 |
10 |
| 2 |
201...204 |
1’ |
1/2" |
170 |
176 |
20 |
15 |
| 3 |
301...304 |
1 1/4" |
3/4" |
185 |
191 |
25 |
20 |
| 4 |
401...404 |
1 1/2" |
1" |
200 |
206 |
20 |
25 |
| 6 |
601...604 |
1 1/2" |
1" |
350 |
356 |
32 |
25 |
| 605...606 |
2" |
1 1/4" |
350 |
356 |
40 |
3 |
| 607...609 |
2 3/4" |
2" |
350 |
356 |
63 |
50 |
| 610...612 |
3 1/2" |
2 1/2" |
350 |
356 |
75 |
65 |
| *Two schedule 80 PVC-U pipe adapters/couplings are included with each flowmeter. As the thread on the flowmeter body is metric, care in fitting selection must be taken if connectors other than the PVC connectors supplied are to be used. |
| **Dimension of metric pipe coupling which can be supplied in materials other than PVC. Please consult factory. |
|
|
2 ea. Schedule 80 PVC -U pipe adapters/couplings are supplied with each flowmeter. The adapters are for pipe sizes according to table 2.
ORDERING INFORMATION
ORDER NUMBER ABCDEF
EXAMPLE: DS15-11101PVC100 |
|
 |
|
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| A=Model |
B=Flow Tube Material |
C=Scale |
D=Range
Number |
E=Process
Connections |
F=Float Material |
| DS15 |
1=PVC-U (standard) |
1= Water |
Select From Table 1 |
PVC= Schedule 80 |
1= PVDF (standard) |
| 2= Polyamide |
2=Air @ Atmos |
PVC pipe termination per Table 2 |
2= 304 SS |
| 3=Polysulfone |
3=Air@1 bar |
3= PVDF with integrated magnet (for meters with alarm or analog outputs) |
| 4=PVDF |
4= Air@2 bar |
N= None |
| |
5= Air@3 bar |
S= Special |
| 9= Special Scale |
|
| |
| Options |
| 00= none |
| 11= 1 alarm contact (N.C.) |
| 21= 2 alarm contacts (N.C.) |
| 12= 1 alarm contact (N.O.) |
| 22= 2alarm contacts (N.O.) |
| 50= analog , 4..20 mA & RS232 output |
|
|
 |
|
|
|
This product sold by PKP Process Instruments, Inc., a joint venture of Clark Solutions
and PKP Prozessmesstechnik GmbH. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
