AMR Data-Control Software

AMR
Data-Control Software
AMR-Control, WIN-Control, and AMR2ips

AMR-CONTROL
AMR-Control software comes free with AMR loggers. It allows the user to program all functions of the AMR loggers and the ALMEMO^® plugs via the PC. It can be used to download the memory of an AMR logger and save it as a .txt file that may be easily opened from another program like MS-Excel^®. The data may also be streamed to the PC "online" and saved continuously to the PC's hard drive.

WIN-CONTROL
WIN-Control is a Windows^® program used for recording and evaluating measurements obtained with AMR instruments. Using WIN-Control is very easy: the program automatically recognizes the connected instruments and sensors. WIN-Control allows the user to perform online measurement logging and evaluation with connected instruments and sensors, or offline measurement evaluation by downloading logged measurements from an instrument's memory.

Measurements may be displayed in graph, bar graph, digital display, analog gauge display, Wind Rose, list format, or on a project drawing (from a bitmap or other file type like GIF, JPG, etc.). Multiple display formats and multiple configurations of each format may be viewed (several graphs and digital displays on the same screen, for instance). Special formula channels may be entered to perform a variety of calculations based on the measurement channels. Measurement data and display configurations may be saved and later recalled for analysis or use with other data.

WIN-Control makes it possible to control all AMR logger and ALMEMO^® plug programming from the P.C.. Three versions of the software are available, depending on the extent of the user requirements. Additionally, options are available for performing special-purpose functions. When used with AMR2ips software, WIN-Control can view and control loggers not directly connected to that PC, but connected to a PC elsewhere on the LAN or Internet.

a printer friendly Acrobat™ file for each of the following:

MINIMUM REQUIREMENTS
Computer: 80486 or Pentium
Operating System: Windows 3.1/98/NT/XP or Windows 2000
RAM: 16 to 32MB
Hard Disk Space: 4MB
Serial Interface: minimum 1 free, buffered RS232

ORDERING INFORMATION

PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS

Model Description

SW5500-WC1 WIN-Control Software - 1 instrument, up to 20 measuring channels

SW5500-WC2 WIN-Control Software - any number of measuring points and instruments

SW5500-WC3 WIN-Control Software - same as SW5500-WC2, includes all optional functions

SW5500-WCO1 Option: Network Capability (addressing of several AMR loggers via RS232 or RS422)

SW5500-WCO2 Option: Data Auto-Save (daily or weekly files)

SW5500-WCO3 Option: Modem Support (can communicate with remote loggers via modem)

SW5500-WCO5 Option: Alarm Function (alarm value record, output to Relay device, auto-start other applications…)

SW5500-WCO6 Option: TCP/IP (addressing loggers using TCP/IP addresses)

SW5500-WCR Win-Control Software Remote Version - must be used with SW5500-WC3

AMR2IPS
AMR2ips allows for using TCP/IP Ethernet protocol so as to enable the use of an Ethernet LAN to communicate between a PC and logger(s). AMR2ips is used in conjunction with WIN-Control software. Two versions are available, depending on the LAN, PC, and logger configuration. It is best to discuss individual applications with our knowledgeable Sales staff to determine the optimum software configuration - please feel free to contact us to discuss your requirements.

MINIMUM REQUIREMENTS
Computer: Pentium
Operating System: Windows 95/98/NT/ME/XP or Windows 2000
RAM: 32 MB
Hard Disk Space: 1 MB Min.
Network Interface: TCP/IP protocol

ORDERING INFORMATION
SW5500-C21 AMR2ips, full version
SW5500-C22 AMR2ips, light version

For assistance call 978-568-3400