|
|
|
 |
EMX 08 Miniature Piston Pump
Solenoid Operated
DESCRIPTION
Model EMX08 oscillating piston pump is a great solution for low volume liquid pumping applications where small size is a critical factor.
The piston size and the length of its displacement define the flow rate. The pressure limits itself automatically. The pump will run without damage when the liquid flow is stopped for short periods.
Model EMX-08 Piston Pump is offered with two or three valves depending on the inlet suction required.
The precision ground machined elements: piston and bushing, guarantee minimum wear and exceptional component life. A selection of wetted material parts make the pump suitable for a wide range of fluids.
SPECIFICATIONS
GENERAL
Pump Materials-303, 304, 316, & 431 SS
Pump Seal Material - PTFE or Buna-N
Solenoid Housing - Molded Epoxy
Maximum Pressure -11.6 PSI
Maximum Flow - 2.4 GPH
Suction Height - 2 Valves:5ft; 3 Valves:10 ft
Viscosity Rang e- 1cSt....600cSt
Partical Tolerance - 4/1000 inch mesh
Supply Voltage - 12, 24, 110, 230VAC,
diode rectified
Frequency - 50/60 Hz
DC Operation: Optional model PD-106 DC
driver board
Electrical Connections - Spade, DIN or Leads
Power Consumption - 18 W
Operating Factor - 100% continuous@ 68°F
Weight - 0.2 lb
Operating Ambient Temperature - 32-120°F
Operating Fluid Temperature - 32-170°F
|
|
