MODEL EPK PINCH VALVE Solenoid Operated, Two Way Configuration
DESCRIPTION Model EPK pinch valves are large, rugged pinch valves for use with 10 mm and 15 mm I.D. silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted components need periodic replacement.
Model EPK valves retain the tubing in a closed cradle. An integral mounting bracket is standard.
SPECIFICATIONS
GENERAL Rated Voltage - 12Vdc or 24Vdc
Min. Operating Voltage - 90% of rated voltage
Drop Out Voltage - 10% of rated voltage
Duty Cycle - 10% on time, 90% off to max
on time of 5 minutes
Power Consumption - 60 Watts
Coil Temp. Rise - Max 80°C from room temperature
Coil Lead Wire - Neoprene coated, 0.5 x L300 mm
Tube Material - Silicone Rubber
Tube Size - 10 mm or 15 mm I.D.
Max Operating Pressure - 0.5 bar(10 mm I.D);
0.2 Bar (15 mm I.D.)
Weight - 1200 grams
Insulation Class - Class E
Insulation Resistance - 10 Mohm at 500 Vdc
Dielectric Strength - 1500 Vac/1 minute
PharMed is a registered trademark of Norton Company
