 |
|
|
|
|
 |
PKP
FS00Z Float Switch
Float Level Switch With Micro Switch, For Polluted And Other Media
|
|
|
DESCRIPTION
The FS00Z level switch consists of a polypropylene housing with an integrated watertight and position dependent electromechanical microswitch. The unit works according to the lift principle. The hollow float is raised (lowered) by the rising (falling) liquid until it reaches an angle of 45° from horizontal when switching takes place. The mercury free float switch can be mounted to the tank/container via a through hole such as a 1/2“ cable gland from the tank top.
The switch point is defined by manipulating placement of a supplied ballast weight on the connecting cable or by inserting cable through a tube of desired length.
The FS00Z level switch is suitable for level monitoring of compatible liquids and, due to the high contact rating of 10 (8) Amps, 250V, for direct pump control. It is well applied for potable water applications as well as heavily polluted media.
|
|
|
|
 |
|
|
|
SPECIFICATIONS
Contact Rating:
SPST- N/O, 10A resistive (8A inductive),250V;
SPST- N/C 10A resistive (8A inductive), 250 V;
SPDT, 6A (4 A inductive), 250 VAC
Cable Material:
Neoprene (black): Standard cable for general use
Polyurethane (yellow): For mineral oil & gasoline
LAPPTherm (olive): For bio oil, grease & chemicals
Special cable on request
Cable Connection to Float: Polyamide cap nut
Cable Length: 5, 10 or 20 meters (special lengths available)
Connection: 3-wire (comm., signal, ground) for SPST, N/O
and N/C versions, 4-wire for SPDT version
Configuration:
N/O closes on rise in fluid level (opens on fall);
N/C opens on rise in level (closes on fall);
SPDT for N/O or N/C operation
Electrical Protection: IP68
Max Pressure: 2 bar (29 PSI)
Max Media Temperature: 60°C or, with LAPP-Therm
cable, 95°C
Storage Temperature: 95°C max.
Float Material: Polypropylene, mirror welded
Float Dimensions: 40 mm x 95 mm x 68 mm
Ballast Material: cast iron, plastic coated (Levasit)
Ballast Dimensions: 30 x 30 x 190 mm
Weight: Float, 110g; Ballast, 700g
Media Density: Minimum 0.55 g/cm3
Switching Angle: ±45o from horizontal
Rated Life: Minimum 50,000 switch cycles |
|
|
|
-Low Cost
-Vertical or Horizontal Mounting
-Simple Installation
-General Use, Oils, Chemicals, Gasoline, Grease
|
|
|
|
 |
|
|
ORDERING INFORMATION
ORDER NUMBER ABCDE
EXAMPLE FSOOZWN51 |
|
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| A |
B |
C |
D |
E |
| Model |
Contact Function |
Cable Material |
Cable Length |
Ballast Weight |
| FS00Z |
W= SPDT
|
L=LAPP-Therm
|
5= 5m |
0= Without |
| 10= 10m |
1= With |
| 20= 20m |
|
|
|
|
|
|
|
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| A |
B |
C |
D |
E |
| Model |
Contact Function |
Cable Material |
Cable Length |
Ballast Weight |
| FS00Z |
W= SPDT |
L=LAPP-Therm |
5= 5m |
0= Without |
| S= N/O |
N= Neoprene |
10= 10m |
1= With |
| O= N/C |
P= Polyurethane |
20= 20m |
|
| |
|
99= Other |
|
|
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
