K12 Peristaltic Pump from Clark

K12 Peristaltic Pump
Flow Rate To 16.8 L/min

DESCRIPTION
A simple but extremely robust pump with conventional 3 roller design. Ideal for heavy duty operations, intermittent or continuous duty. Excellent performance on suction lift and pumping of viscous liquids. Polyester coated aluminum pump head for chemical resistance.

SPECIFICATIONS
Pumphead
Precision machined aluminum alloy, polyester coated for chemical resistance. It is fitted with rubber shielded support bearings and supplied with adjustable tube clamps.
Front cover
Acrylic with safety warning and four
    quick release, quarter-turn fittings.
Rotor
3 roller type (silver), anodized aluminum
    alloy
Rollers
Nylatron^® 66, no adjustment needed
Tube
Autoprene^®, 16 mm thick wall (4.8 mm).
Polypropylene tube connectors
    provided.
Motor
AC induction motor with gearbox,
   110/230 Vac, single phase,
   220/440Vac, three phase, 50/60 Hz.
Ratings offered- IP 55
Permanent magnet DC 120Vdc, 240Vdc
Robust worm drive gearbox - various
speeds per table
Power Consumption-300watts
Weight 12 kgs

Flow Rates- ml/min
Tubing ID (mm)	AC 60Hz				ml/RPM
Tubing ID (mm)	67RPM	84RPM	111RPM	16800RPM	ml/RPM
16	6720	8400	11160	16800	100

ORDERING INFORMATION
ORDER NUMBER (SEE TABLE)
K12 -ABCDE (K12-84A131)

A=RPM	B=Tubing	C=Tubing ID	D=Rollers	E=Power
67=67	A=Autoprene	1=16	3=3	1=110/230,1P
84=84				2=220/440,3P
111=111
16800=16800

For assistance call 978-568-3400