|
|
 |
Model KV2 Inert Manifold Mount Isolation Valve
Solenoid Operated, Two-Way Single & Multiple Valve Configurations
DESCRIPTION
Model KV2 series two-way normally closed isolation valves are extremely small at only 6mm in width. They are ideal for low volume fluidic systems where reduction of piping internal volumes is essential. They can be used as single valves or purchased in a standard inter-connected manifold arrangement.
The internal volume of the KV-2 is only 10 microliters at the inlet and 10 microliters at the outlet. The valve has zero dead volume. All wetted materials are inert and isolated by a diaphragm from metal parts.
SPECIFICATIONS
GENERAL
Rated Voltage - 12Vdc or 24Vdc
Min. Operating Voltage - 90% of rated voltage
Drop Out Voltage - 10% of rated voltage
Duty Cycle - continuous
Power Consumption - 1.8 Watts
Coil Lead Wire - PTFE coated, 0.08 x L300 mm
Orifice Size - 0.8mm
Internal Volume, Inlet - 10 microliter
Internal Volume, Outlet -10 microliter
Max Operating Pressure - in-1.0 bar; out-0.5bar
Ambient Temperature Range - 0-40°C
Fluid Temperature Range - 0-50°C
Body Material - PEEK, PPS
Diaphragm Material - Perfluoroelastomer, FPM
O-Ring - Perfluoroelastomer
Weight - 8.50grams
Insulation Class - Class B
Dielectric Strength - 1000 Vac/1 minute |
|
