M1000 Peristaltic Pump
Flow Rate To 768 ml/min


DESCRIPTION
Model M1000 is the smallest of a two pump group featuring a unique and patented quick-change tube loading system. The tube cartridge can be changed easily by unclipping from the pumphead and replacing with a new cartridge.

Tube creep is eliminated through use of dove tail sectioned tubing ultrasonically welded to the tube cartridge.


SPECIFICATIONS
Pumphead
Black polycarbonate with support bearing
Mounting Plate
Black polycarbonate with 4 mounting holes at 76 mm centers
Tube Cartridge
Available in black polysulfone, autoclavable or in clear K-resin for sterilizing by gamma or ethylene oxide.
Cartridge Retainer Clip
Stainless steel
Rotor/Rollers
Polycarbonate with stainless steel insert.
Nylatron rollers angled with adjustable position.
Tube
Silicone, 1.5mm, 4mm, 5mm, 6mm; Autoprene dove tail, 6mm; Polypropylene tube connectors provided.
Motor
Asynchronous shaded pole 24Vac, 110Vac,
   220 Vac, 240Vac, 50/60 Hz.
Permanent magnet 12Vdc or 24Vdc.
Induction motor AC
Gearbox speeds listed below
Power Consumption- 140-280 watts AC;
   12-35 watts DC
Options
Encoder shaft
Additional support bearings
Weight 1.6 kgs

M1000 Peristaltic Pump from Clark
M1000 Peristaltic Pump from Clark
Flow Rates ml/min
*Tube 65RPM 85RPM 125RPM 175RPM 240RPM
1.5mm 18 - - - -
4.0mm 130 170 250 350 480
5.0mm 169 221 325 450 620
6.0mm 208 272 400 560 768
* See "Tubing for Peristaltic Pumps" application sheet for tubing properties.
ORDERING INFORMATION

ORDER NUMBER
M1000 - ABCDEF
 
EXAMPLE:  M1000 - 2A321

A=RPM B=Tubing C=Tubing ID D=Rollers E=Power F=Options
1=65 A=Autoprene 1=1.5mm 2=2 1=24Vac 0=None
2=85 S=Silicone 2=4.0mm   2=110Vac 1=Encoder Shaft
3=125   3=5.0mm 3=220Vac
4=175 4=6.0mm 4=240Vac 2=Additional support bearings
5=240   5=12Vdc
  6=24Vdc


For assistance call 978-568-3400


pumps | valves | instrumentation | new products | contact clark | site/product directory | enewsletter | home