|
|
|
 |
MTV-3N, Inert 3-way Isolation Valve
Solenoid Operated, PEEK or PPS Body
DESCRIPTION
Model MTV-3N inert 3-way isolation valve offers great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals which are forgiving of particulate matter that would typically destroy an inert valve.
The MTV-3N is offered with molded PEEK or PPS body material. The isolation diaphragm is PTFE and the valve seal material is a soft Perfluor.
SPECIFICATIONS
GENERAL
Rated Voltage - 12Vdc or 24Vdc
Min. Operating Voltage - 90% of rated voltage
Drop Out Voltage - 10% of rated voltage
Response Time - on, 15-22ms; off, 5-10ms
Power Consumption - 4.4 watts
Coil Temp. Rise - Max 75°C from room
temperature
Orifice Diameter - 1.8 mm
Solenoid Housing- SPS (Syndiotactic Polystyrene)
encapsulated
Internal Volume - COM, 61 micro liters
NC & NO,72 micro liters
*Operating Pressure - COM, -0.8 to 2.0 bar
NC/NO, 0-0.5 bar
Media Temperature Range - 5-60°C
Ambient Temperature Range - 5-50°C
Operating Life - 9 million cycles
Weight - 88 grams
Insulation Class - Class B
Insulation Resistance - 50 Mohm at 500 Vdc
Dielectric Strength - 1500 Vac/1 minute
Port Connection - 1/4-28 or M6 threaded
Valve Body Material - PEEK or PPS
Valve Stem - PEEK or PPS
Isolating Diaphragm Material - PTFE
Valve Seat Seal Material - Perfluor
* A high pressure model (6 bar) is available,
consult factory
|
|
