 |
|
|
|
|
|
 |
AMR
Meteorology Sensors & Accessories for AMR Dataloggers
Wind Speed, Wind Direction, Rainfall |
|
|
WIND VELOCITY SENSOR MODEL FVA615-2
- Wind sensor for measuring the horizontal wind
velocity.
- Cup-type made from stable plastic, electronics are
housed in weather resistant aluminium enclosure,
rotating shaft guided in high-quality ball bearings.
- A special labyrinth shaft seal reliably protects
without friction and guards against water
penetrating into the housing.
- With electronically controlled heating for winter
operation to prevent ball bearings and external
rotational parts from freezing. |
|
|
 |
|
|
|
|
| Get a printer friendly Acrobat™ file for each of the following:
|
|
|
SPECIFICATIONS
Measuring range: 1 to 110 MPH
Accuracy: ±1 MPH ±3% of meas. value
Resolution: 0.1 MPH
Measuring principle: opto-electrical (slotted disk)
Sensor power supply: 9–30VDC from datalogger via
ALMEMO® connector plug
Heating: 24VAC/DC max. 20W (separate power supply)
Operating range: -30 to +70°C, with heating
|
|
Cable: 12m long, LiYCY 6 x 0.25mm2
Connection: Adapter cable with ALMEMO® connector including supply cable for heating (length 1.5 m,
free ends)
Installation: Pole tube with PG21 thread, 29 mm
diameter
Weight: 750g |
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| Model |
Description |
| FVA615-2 |
Cup type anemometer including ALMEMO Connector (0-2V) with 12m cable |
| ZB9060-k(L) |
12 m cable with ALMEMO connector (Longer cable, specify length (L) in meters |
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| Model |
Description |
| FVA615-2 |
Cup type anemometer including ALMEMO Connector (0-2V) with 12m cable |
|
|
|
|
WIND DIRECTION SENSOR MODEL FVA614
-Wind direction sensor for measuring the horizontal
wind direction.
-Wind vane made from stable plastic, electronics are
housed in weather resistant aluminium enclosure,
rotating shaft guided in high-quality ball bearings.
- A special labyrinth shaft seal reliably protects
without friction and guards against water
penetrating into the housing.
- With electronically controlled heating for winter
operation to prevent ball bearings and external
rotational parts from freezing |
|
|
|
|
|
|
|
|
 |
|
|
SPECIFICATIONS
Measuring range: 0 to 360°
Accuracy: ±5°
Resolution: 11.25° (5 bit Gray code)
Measuring principle: opto-electrical (slotted disk)
Sensor power supply: 9–30VDC from datalogger via
ALMEMO® connector plug
Heating: 24VAC/DC max. 20W(separate power supply)
Operating range: -30 to +70 °C, with heating
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| Model |
Description |
| FVA614 |
Wind vane including ALMEMO Connector (0-2V) with 12m cable |
| ZB9060-k(L) |
12 m cable with ALMEMO connector (Longer cable, specify |
|
|
Cable: 12m long, LiYCY 6 x 0.25mm2
Connection: Adapter cable with ALMEMO® connector
including supply cable for heating (length 1.5 m,
free ends)
Installation: Pole tube with PG21 thread, 29 mm
diameter
Weight: 1100g
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| Model |
Description |
| FVA614 |
Wind vane including ALMEMO Connector (0-2V) with 12m cable |
|
|
|
|
|
|
|
 |
|
|
RAINFALL SENSOR MODEL FRA916
-Rainfall sensor according to the tipping scale
principle with electronic counting of the table tilts
and direct conversion into the amount of rainfall.
- Rainfall sensor with sieve bar for protection against
insects or other contaminations.
SPECIFICATIONS
Measuring range: 0.008 inches/pulse
Resolution: 0.01 inch
Capture cross section: 400cm2
Heating : 24 V DC/AC, max. 30 W (separate power
supply)
Operating range : 0 to +50 °C, with heating -30 to
+50 °C
Cable : 12 m
Connection : Adapter cable with ALMEMO® connector
including supply cable for heating (length 1.5 m,
free ends)
Material of housing: corrosion-proof metal
Material of tipping scale: weather-resistant plastic
Dimensions: 280mm high, 240mm Ø
Weight: 2.4kg
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| Model |
Description |
| FRA916 |
Rainfall sensor without heating including ALMEMO connector with 12 m cable |
| FRA916H |
Rainfall sensor with heating in insulated metal housing including ALMEMO connector with 12 m cable |
| ZB9060-k(l) |
Longer cable, specify length (L) in meters |
| ZB9916-AF |
Push-in/put-up stand with mounting hose |
|
|
|
ACCESSORIES |
|
|
|
 |
|
 |
|
|
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| Accessory Part Number |
Description |
| ZB9015-TC |
Cross arm for separate wind direction and wind velocity sensors or for attaching radiation probes |
| ZB9015-BS |
Lightning protection rod for fixed mounting on pole |
| ZB9015-ST |
Tripod stand, extendable up to 4 m for mobile measuring operations (bracing fixtures / ground fixtures, to be provided by the user on site) |
| ZB9015-AG |
Weather-proof housing with lockable clear view door for housing ALMEMO® devices |
|
|
Mobile Weather Station Mounted on Tripod Model ZB9015-ST
Includes AMR Datalogger in Weather Proof Box |
|
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
