Clark Solutions
Model OP-6 Impeller Pump
Liquids to 3.3 GPM, Pressure to 15 PSI, Bi-Directional Flow
DESCRIPTION
The OP-6 is a reliable transfer impeller pump suited for oil, diesel fuel, and water. The reversing pump can transfer hot or cold oils easily with no mess directly from an engine oil pan or other source.
A built in switch guard prevents accidental activation of the three position switch. The switch is directionally oriented (flow is in direction of the switch) for easy operation.
SPECIFICATIONS
GENERAL
Ports: External M 3/4" hose; Internal
3/8" NPT
Motor: 12VDC or 24VDC
Current (at 20 PSI Load): 7.0 Amps @
12V, or2.9 Amps @ 24V
Flow Rate : 3.3 GPM
Self Priming: 3 Ft
Lift: 20 ft of water
Working Pressure: 15 PSI
Pump Body: Nickel Brass
Impeller: Nitrile (Viton® optional)
Seal: Rubber
OP-6
Cutaway Showing Flexible
Nitrile Impeller
ORDERING INFORMATION
Example: OP-6-12-N
| Model | Voltage | Impeller |
| OP-6 | 12= 12 VDC 24= 24 VDC | N= Nitrile (Standard) V= Viton® |
| Spare Parts | |
| Impellers & Gaskets | |
| 360010 | Impeller (Nitrile) use for oil or water transfer |
| 360014 | Impeller (Viton®) use for diesel fuel transfer |
| 360120 | Gasket for OP-6 |
| Repair Kits- Includes Impeller and Gasket | |
| SRK-360 | 1 Oil/Water Set |
| SRK=370 | 1 Diesel/Oil Set |
| Repair Kits- Includes Impeller, Gasket & Seal | |
| SRK-361 | 1 Oil/water set and seal |
| SRK-371 | 1 Diesel/oil set and seal |
|
|
Assorted Parts for OP-6 |
| 360060 | Cover Plate for OP- 6 |
| 360070 | Brass Cam for OP- 6 |
| 36015 | Fuse (15 amp slow burn) |
| 360002 | Pump Head Assembly |