|
|
 |
TAKASAGO
MODEL PK PINCH VALVES
Solenoid Operated, Two Way Configuration
DESCRIPTION
Model PK pinch valves are rugged pinch valves for use with 1.6, 3.2 and 4.8 mm I.D. Silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted components need periodic replacement.
Model PK valves retain the tubing in a closed cradle.
SPECIFICATIONS
GENERAL
Rated Voltage - 12Vdc or 24Vdc
Min. Operating Voltage - 90% of rated voltage
Drop Out Voltage - 10% of rated voltage
Power Consumption- 13 Watts
Coil Temp. Rise - Max 80°C from room temperature
Coil Lead Wire - RAD Wire V, AWG 22, UL1430,
L300 mm
Tube Material - Silicone Rubber
Tube Sizes - 1.6 mm ID x 4.8 mm OD, 3.2 mm ID x
6.4 mm OD, 4.8 mm ID x 8 mm OD and 6.4 mm
ID x 9.6 mm OD
Tube Holder - Modified PPO
Pinching Head - Silicone Rubber
Spring - SUS304WPB
Seamless Pipe - SUS304
Solenoid Housing - SPS (Syndiotactic Polystyrene)
encapsulated
Max Operating Pressure - 0.5 bar
Weight - 290 grams
Insulation Class - Class E
Insulation Resistance - 50 Mohm at 500 Vdc
Dielectric Strength - 1500 Vac/1 minute
1) Pole Piece
2) Frame
3) Seamless Pipe
4) Spring
5) Coil Assembly
6) Tube Holder
7) Plunger
8) Pinching Head
| Model |
A |
| PK1605 |
65* |
| PK3205 |
83* |
| PK4805 |
83* |
| PK6405 |
83* |
| *Add 5.3 mm for NO |
|
|
