| Switch Options |
| 0140 |
Gold
contacts, 1 amp 125 VAC resistive, NOT AVAILABLE MODELS H122P, 820E, & 822E |
| 0500 |
Close
deadband, 5 amp 125/250 VAC resistive. NOT AVAILABLE MODEL H122P Ranges 520-535 |
| 1010 |
DPDT switch,
10 amp 125/250 VAC resistive. NOT AVAILABLE TEMPERATURE VERSIONS; MODELS H122,
H122P, H122K; OR J120K
RANGES 36-39, 367, AND 540-548; OR J120 RANGES 171-194, 483-494, 520-535,
560-567, 680 |
| 1070 |
10 amp 125
VDC or VAC resistive; deadband and minimum set point will increase. NOT
AVAILABLE MODELS 820E, 822E, H122P, H122K,
B122, AND J120K RANGES 36-39; J120 RANGES 171-194, 483-494, 520-535 |
| 1180 |
Hermetically
sealed SPDT, 11 amp 125/250 VAC resistive, must be specified with model H122P.
NOT AVAILABLE MODELS B122, E122, H122, H121K
and H122K, 820 AND 822E; deadband and minimum set point will increase |
| 1190 |
Hermetically
sealed DPDT, 11 amp 125/250 VAC; products set on rising pressure or temperature
due to inherent separation of circuits on
falling pressure or temperature; specify option 1195 if setting on fall is
required; deadband and minimum set point will increase. Not
available models 820E, 822E, B121, B122, E121, E122, H121, H122, H121K, H122K,
H122P or ranges 523, 533 |
| 1195 |
Hermetically
sealed DPDT, 11 amp 125/250 VAC; products set on falling pressure or temperature
due to inherent separation of circuits on rising
pressure or temperature; specify option 1190 if setting on rise is required;
deadband and minimum set point will increase. Not
available models 820E, 822E, B121, B122, E121, E122, H121, H122, H121K, H122K,
H122P or ranges 523, 533 |
| 1519* |
Adjustable
deadband, 15 amp 125/250/480 VAC resistive; adjustable wheel changes rise
setting only; if adjustment of fall setting is
required use primary adjustment; deadband and minimum set point will increase.
Not available models 820E, 822E, B121, B122, E121,
E122, H121, H122, H121K, H122K, H122P or ranges 171-194, 483-494, 520-535,
612-616 |
| 1530 |
External
manual reset, 15 amp 125/250/480 VAC resistive; latches on rise only. Not
available models 820E, 822E, B121, B122, E121,
E122, H121, H122, H121K, H122K, H122P ranges 520-535 or with ATEX certification |
| 1535 |
High ambient,
15 amp 125/250 VAC resistive; temperatures up to 250°F (120°C). Not
available models 820E, 822E, H122P ranges 520-535 1537 |
| 1537 |
Vapor sealed
switch, 15 amp 125/250 VAC resistive. Not available models 820E, 822E, H122P or
ranges 520-535 |
| 1539 |
Fungus
resistant case, 15 amp 125/250 VAC resistive. Not available models 820E, 822E,
H122P or ranges 520-535 |
| 2000 |
20 amp
125/250 VAC resistive. Not available ranges 520-535, 540-548 |
| 3000 |
30 amp
125/250/300 VAC resistive. Not available models 820E. 822E, B121, B122, H121,
H122, H121K, H122K, H122P for ranges
36-39, 171-193, 483-493, 520-535, 540-548, 560-567 |
| *Please
note: In order to accommodate free movement of adjustable wheel, left hand
electrical conduit is permanently sealed. |
| Optional Sensor
For “WC Ranges. Available for range codes 52-525 |
| XC001 |
Aluminum
pressure connection, Viton® diaphragm,
Viton® O-Ring |
| XC002 |
Aluminum
pressure connection, Kapton® diaphragm, Buna-N O-Ring |
| XC003 |
Aluminum
pressure connection, Kapton® diaphragm,
Viton® O-Ring |
| XC004 |
316L
Stainless steel pressure connection, 316L Stainless steel diaphragm, Viton®
O-Ring (Over range
pressure is limited to 100 psi) |
| XC005 |
316L
Stainless steel pressure connection, Viton® diaphragm,
Viton® O-Ring |
| XC006 |
316L
Stainless steel pressure connection, Kapton® diaphragm,
Viton® O-Ring |
| XC007 |
316L
Stainless steel pressure connection, Teflon® diaphragm,
Viton® O-Ring |
| Other Options |
| M201 |
Factory set
one switch |
| M202 |
Factory set
two switches. Not available single switch versions |
| M210 |
Differential
pressure indication. Available on H121K, H122K, RANGES 147, 157, S147B, S157B
only |
| M277 |
Range
indicated on nameplate in kPa or MPa. Not available on temperature versions |
| M278 |
Range
indicated on nameplate in Kg/cm2. Not available on temperature versions |
| M300 |
NEMA 4
construction, available models 820E & 822E only |
| M320 |
Tamper
resistant cover for indication portion of control , internal adjustment,
available models 820E & 822E only |
| M407 |
CE Compliance
to Pressure Equipment Directive (category IV). Not available on ranges 126, 137,
520-524, 530-534, 550, 551, S126B,
S137B and all temperature models |
| M440 |
Cover chain |
| M444 |
Paper ID tag |
| M446 |
Stainless
steel ID tag & wire attachment |
| M450 |
Breather
drain. Not available with options 1530, M210, M415 or with ATEX certification |
| M550 |
Oxygen
service cleaning; internal construction may change |
| 6361-704 |
Surface
and pipe mounting hardware. (required for ranges 520-535, 540-548 when surface
mounting) |
