 |
|
|
|
|
|
 |
TD Series PE, PTFE, & Aluminum Diaphragm Drum Pumps
Pneumatically Powered Diaphragm Pumps
For Liquids
DESCRIPTION
The TD series PE, PTFE and Aluminum drum pumps are ideal for mobile use.
They are fitted with a drum tube in Polypropylene (PP) or PTFE and a handle in AISI 316L stainless steel.
The drum tube is delivered in any length up to 2 meters (6’).
Every Tapflo pump goes through an accurate quality check and test run before shipment. All pumps are CE-marked and meet the European Community Machinery Directives. The pumps are shipped with a detailed manual that provides installation, service and parts information..
PUMP SPECIFICATIONS
PE & PTFE & Aluminum: See Pump Data Sheets for Pump Specifications. PE & PTFE - TapfloPTFE.pdf; Aluminum - TapfloAluminum.pdf.
FEATURES
RUN DRY WITHOUT DAMAGE
INFINITELY VARIABLE FLOW CONTROL
SELF PRIMING TO 8 METERS W.C.(26 FEET)
GOOD FOR SENSITIVE LIQUIDS THANKS TO SMOOTH NON-ROTATING OPERATION
HANDLES CHEMICALLY AGGRESSIVE, LOW VISCOSITY, ABRASIVE, SOLID LADEN & VISCOUS FLUIDS
NON-POLLUTING AIR DISTRIBUTION SYSTEM
EXPLOSION PROOF DESIGN AVAILABLE
|
|
|
 |
|
For PE & PTFE
For Aluminum
|
|
Explosion Proof Model
Pumps made from conductive carbon filled PE or PTFE are for use in explosion hazard environments. The conductive material ensures that no electrostatic loads will be accumulated in the pump. The conductive pigments in the material reduces the surface resistance to less than 105W. The pigments, causing a black color, do not affect the chemical resistance of the thermoplastic |
 |
|
|
|
| PE & PTFE Models |
| Model |
Description |
| TDR20 |
20 LPM, 3/8” NPT connections |
| TD50 |
50 LPM, 1/2” NPT connections |
| TD100* |
100 LPM, 1” NPT connections |
| *available in PE only, no handle |
| Aluminum Models** |
| Model |
Description |
| TD25 |
25 LPM, 1/2” NPT connections |
| TD70 |
70 LPM, 3/4” NPT connections |
| TD120 |
120 LPM, 1” NPT connections |
| **Stainless Steel available on request |
|
|
|
ORDERING INFORMATION
ABCDEF
EXAMPLE : TDR20TT1.5MPTFE |
|
|
| A=MODEL |
B=WETTED MATERIALS |
C=DIAPHRAGM MATERIAL |
D=BALL VALVE MATERIAL |
E=TUBE LENGTH |
F=DRUM TUBE MATERIAL |
| SELECT FROM TABLE |
A=ALUMINUM |
E=EPDM |
E=EPDM |
SPECIFY LENGTH IN METERS (M) or MM (MM) |
PP=POLYPROPYLENE |
| P=PE |
N=NBR |
N=NBR |
PTFE=PTFE |
| T=PTFE |
T=PTFE |
T=PTFE |
AL=ALUMINUM |
|
|
| OTHER TAPFLO PRODUCTS |
Twin pump piping arrangement is ideal when pumping two different liquids separated from each other, in the same pump. Used for glue and ink etc. |
A stroke counter is an easy way to pump a preset volume of fluid. The number of strokes are preset via an LED display and the electronic unit then controls the pump auomatically. |
In applications with critical safety needs a diaphragm monitor can be supplied. The monitor will alarm and shut down the pump in case of a diaphragm break.
|
Diaphragm acting pumps have an inherent pulsating flow output. A pulsation dampener is offered for applications where this cannot be tolerated. |
|
|
|
| For assistance call 978-568-3400 |
|
|
|
|
|
|
|
|
|
|
|
