DESCRIPTION The principle of the magnet drive is the driving force of the pole-to-pole alignment of 2 magnets. The driven magnet is attached to the pump shaft within the pump, while the driving magnet is attached to the motor shaft and closely located to the driven magnet. By means of magnetic attraction, the pump rotates in response to motor shaft rotation.
This series of pumps is available in four different displacements. The housing is either brass or AISI 303 stainless steel with carbon graphite internal components. The pumps can be equipped with an optional built-in relief valve. Inlet and outlet ports have 3/8” GAS female threads. All models are available with NBR, Viton or EPDM seals. Compared to conventional coupling, the magnet drive has several advantages:
1. Immediate decoupling upon overload
2. Higher efficiency
3. Longer service life
4. No leaks or contamination
5. Noiseless operation
TYPICAL APPLICATIONS • Solar heating systems
• Refrigerating gas transfer
• Cooling systems
• Carpet cleaners
SPECIFICATIONS Max. size solid particles: 20 µ
Max. motor speed: 3600 rpm
Max. system pressure: 18 bar (260 psi)
Max. temperature: 60°C (140°F)
ORDERING INFORMATION EXAMPLE: TMSS031
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
Model
By-Pass
Housing
Figure
TMSS031
Standard
SS
A-A
TMSS051
Standard
SS
B-B
TMSS071
Standard
SS
C-C
TMSS101
Standard
SS
D-D
TMSS151
Standard
SS
E-E
TMSS201
Standard
SS
F-F
Options
TMB3/HD - Adaptor assembly for attaching Model TM to a 56C-face motor. Includes drive magnet, coupler pieces and all hardware.
Optional Motor Coupling
TMB3/HD: Adaptor assembly shown in exploded view on right for attaching Model TM to a 56C-face motor. Includes drive magnet, coupler pieces and all hardware. Other motor couplings on request.
