 |
|
|
|
|
|
|
 |
|
|
MCP & PKP Series Inert Dispensing Pumps
Solenoid Operated, Dispensed Volumes from 1 to 500 µl
DESCRIPTION
Model MCP & PKP dispensing pumps have inert wetted parts and accurately dispense liquid media over an adjustable range of 1 to 500 micro liters.
The pumps utilize a solenoid operated piston with a spring return. The MCP-10 type pump is basically a two-way inert valve with one port plugged. The pumping function is like that of an eye dropper. The MCP-50 and the PKP type pump have opposing duck bill type check valves at the pump inlet and outlet that work with the piston movement for pumping action. The piston stroke can be field adjusted or factory set to deliver a prescribed volume with each solenoid actuation. The process media is isolated from the metal solenoid parts by an inert diaphragm.
Model PKP-300 can pump a maximum of 300 microliters per solenoid actuation and Model PKP-500 can pump 500 microliters.
|
|
 |
|
|
 |
|
|
|
|
|
OPERATING NOTES, Models MCP-10, 50; PKP-300, 500
1) The pump duck bill type check valves open at very low differential
pressure so the pump outlet must be mounted above the fluid
reservoir to prevent siphoning.
2) The pump should be mounted horizontally with the base side down.
3) When the dispense volume is less than 250µl, purging air bubbles is
more difficult. It is therefore advisable to prime the pump at max
delivery before setting the desired dispense volume.
4) Consult factory for effect of media temperature on output.
SPECIFICATIONS
|
|
|
| Pump Model |
MCP-10R |
MCP-50 |
PKP-300PF |
PKP-500P |
| Rated Voltage |
5Vdc,12Vdc , 24Vdc |
12Vdc , 24Vdc |
12Vdc , 24Vdc |
12Vdc , 24Vdc |
| Power Consumption |
2.6w |
4.4w |
5.5w |
5.5w |
| Max Pumped Volume/Actuation |
10µl |
50µl |
300µl |
500µl |
| Adjustable Range |
1-10µl |
5-50µl |
10-300µl |
50-500µl |
| Pumped Volume Accuracy |
-- |
±1% 15-50µl; ±2% 5-15µl |
±1% |
±1% 50-500µl; ±2% 10-50µl |
| Max Operating Frequency |
4Hz |
4Hz |
1Hz |
2Hz |
| Fluid Connection |
-- |
-- |
1/4-28 thread or M6 |
-- |
| Media Temp Range |
-- |
-- |
10-40°C |
-- |
| Ambient Temp Range |
-- |
-- |
10-40°C |
-- |
| Insulation Class |
Class B |
Class B |
Class E |
Class E |
| Insulation Resistance |
-- |
-- |
min 50Mohm at 500Vdc |
-- |
| Dielectric Strength |
-- |
-- |
1500Vac/60 seconds |
-- |
| Body Material |
PPS |
PTFE,POM,PP |
POM,PP |
POM,PP |
| Isolation Diaphragm |
-- |
-- |
FPM |
-- |
| Check Valves |
None |
FPM |
FPM |
Silicone |
|
|
|
|
|
 |
|
|
 |
 |
|
ORDERING INFORMATION
EXAMPLE: MCP-50-12V-PTFE |
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| Model Number |
Voltage |
Adjustable Range |
Body Material |
| MCP-50 |
12VDC |
5-50µL |
PTFE |
| MCP-50 |
24VDC |
5-50µL |
PTFE |
| PKP-500P |
12VDC |
50-500µL |
PP |
| PKP-500P |
24VDC |
50-500µL |
PP |
| Bold Items Typically Ship from Stock |
|
|
|
|
|
Show Discount Schedule
|
|
| OR PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| Model Number |
Voltage |
Adjustable Range |
Body Material |
| MCP-10R |
5VDC |
1-10µL |
PPS |
| 12 VDC |
1-10µL |
| 24VDC |
1-10µL |
| MCP-50 |
12VDC |
5-50µL |
PTFE |
| 24VDC |
5-50µL |
| PKP-300 |
12 VDC |
10-300µL |
POM or PP |
| 24VDC |
10-300µL |
| PKP-500P |
12VDC |
50-500µL |
PP |
| 24VDC |
50-500µL |
| PKP-800 |
12 VDC |
800µL |
POM or PP |
| 24VDC |
800µL |
| Bold Items Typically Ship from Stock |
|
|
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
