DESCRIPTION Model series WTA inert isolation valves offer great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals that are forgiving of particulate matter that would typically destroy an inert valve.
The WTA series are a two way, normally closed configuration. Model WTA-2R have molded PPS bodies and Model WTA-2K have molded PEEK bodies. The valves have PTFE isolation diaphragms and a Perfluor or Viton soft valve seat seal.
SPECIFICATIONS
GENERAL Rated Voltage- 12Vdc or 24Vdc
Min. Operating Voltage- 90% of rated voltage
Drop Out Voltage- 10% of rated voltage
Power Consumption- 2.8 Watts
Coil Temp. Rise- Max 65°C from room temperature
Orifice Diameter- 2mm (1.6 mm for WTA-2R-N3)
Operating Pressure- Inlet -700mmHg to 2.0 bar
Outlet: 1.0 bar
Media Temperature Range- 5-50ºC
Weight- 81 grams
Insulation Class- Class E
Insulation Resistance- 50 Mohm at 500 Vdc
Dielectric Strength- 1000 Vac/1 minute
Port Connection- 1/4-28 threaded, 3 mm or
4 mm barb
Valve Body Material- PEEK or PPS (PTFE optional,
consult factory)
Isolating Diaphragm Material- PTFE
Valve Seat Soft Seal Material- Dai-el Perfluor or FPM
