 |
||||||||||||||||||||||||||
 STV-2-4 |
||||||||||||||||||||||||||
            |
||||||||||||||||||||||||||
| STV Disk Type Inert Manifold Valve Solenoid Operated, PTFE or PEEK Bodies DESCRIPTION Model STV disk type manifold accommodates four two way, normally closed valves with separate inlets and a common outlet on one block of PTFE or PEEK. The unit is only 2 inches in diameter offering excellent economy of space. Model STV has very little internal volume. The valves are isolation type valves and only inert materials are in contact with the process media. Fast response time, consistent valve performance over valve life, and continuous duty rating make the STV valves ideal for solvent selection applications for automated chemistry sample preparation. SPECIFICATIONS GENERAL Rated Voltage - 12Vdc or 24Vdc Power Consumption - 2.4 watts/valve Orifice Diameter - 0.8mm or 1.0mm Fluid Connection - 1/4-28 thread Media Temp Range - 0-60°C Ambient Temp Range - 0-60°C Internal Volume - inlet 22µl each; outlet, 127µl Max Operating Pressure - inlet, 2.5 bar; outlet, 0.5 bar Response Time - 6-8 msec Operating Life - minimum 10 million cycles Coil Temperature Rise - 60°C above ambient Solenoid Housing - black chrome steel Duty Cycle - continuous Insulation Class -Class E Insulation Resistance - 50Mohm at 500Vdc Dielectric Strength - 1500Vac/60 seconds Valve Body Material - PTFE or PEEK Isolating Diaphragm Material - PTFE |
||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||
| Note Designs are available with up to 12 valves per manifold. | ||||||||||||||||||||||||||
DIMENSIONS (MM) |
||||||||||||||||||||||||||
| ORDERING INFORMATION ORDER NUMBER ABCD EXAMPLE: STV-2-4-MX112V
For assistance call 978-568-3400 |
||||||||||||||||||||||||||