|
|
|
|
|
|
|
 |
|
|
Pressure Transmitter 511 Series
Compact, Liquids And Gases, FS Ranges 30" Hg Vacuum to 7500 PSI
DESCRIPTION
The Series 511 pressure transmitters are low cost, compact, and meet the highest specification for mechanical stress, EMC compatibility, and operational reliability.
Model 511 Compact Pressure Transmitter is particularly suitable for demanding industrial applications. The ceramic sensor design utilizes integrated (to the sensor) electronics and is highly stable. Linearity is maintained even in instances of over-pressure. Hysteresis problems and introduction of error due to cold flowing of metal diaphragms over time in competitive designs are eliminated.
The integrated sensor/electronic design of the Series 511 pressure transmitter has a high degree of accuracy over wide temperature range.
|
|
|
|
|
 |
|
|
* HIGH RESISTANCE TO EXTREME TEMPERATURE
* COMPACT, RUGGED CONSTRUCTION
* PATENTED RUPTURE SEALING DEVICE IN
CONNECTOR PREVENTS MEDIA LEAKAGE IN
EVENT OF SENSOR FAILURE
* CERAMIC SENSOR FOR UNMATCHED LONG
TERM RELIABILITY
|
|
 |
|
 |
|
|
|
|
|
|
|
SPECIFICATIONS
Pressure Measurement: Absolute pressure & gage pressure (differential
measurement of pressure relative to ambient pressure).
F.S. Pressure Ranges: -14.5 to 7500 PSI
Maximum/Rupture Pressure:
3.0x Full scale at -14.5 … 7500 PSI
2.5x Full scale at 100 … 6000 PSI
2.0x Full scale at 8700 PSI
Higher rupture pressure on request. A patented media stop system
prevents media egress when exceeding rupture pressure range
(600 PSI nominal value).
Accuracy:
Total of linearity, hysteresis and repeatability: < +/- 0.3% fs
Adjustment accuracy zero point and full scale: < +/- 0.3% fs
Casing: Stainless steel 1.4305 (AISI 303)
Materials In Contact With The Medium:
Ceramic Al2O3
Stainless steel 1.4305 (AISI 303)
Rupture Seal: PPS
Seal Material:FPM, NBR, others on request
Media Temperature With Sealing Materials:
FPM - 15 … + 125°C
NBR - 25 … + 85°C
FPM SPEC. - 40 … + 150°C
Ambient Temperature: Max. 85 °C
(Versions up to 150°C on request)
Temperature Influences:
Zero < +/- 0.015% fs/°C
Span < +/- 0.015% fs/°C
Temperature range - 40 … + 125 °C
Dynamic Response: Suitable for static and dynamic measurements.
Response time < 2 ms, typ. 1 ms
Pressure Connections: See order code selection table
Weight: Version inside thread 85 grams
Version outside thread 95 grams
Installation Orientation: Unrestricted
Signal/Power Supply: See order code selection table
Protection: Short circuit-proof and protected against polarity reversal.
Each connection is protected against other with max. +/- supply
voltage.
Electric strength 500 VDC, on request 1000 VDC
Load:
Voltage outputs: > 10 kOhm / < 100 nF
Current Output: Max 1250 Ohms
Current Consumption With Max. Signal Output:
Voltage outputs: < 4 mA
4 - 20 mA: < 20 mA
Electrical connections : M12 x 1 or cable, 1.5 meters (other connectors
available on request) |
|
 |
|
 |
|
|
| TESTING |
|
| Shock according to IEC 68-2-27: 75 G, 11 ms half sine wave, all 3 directions. Free fall from 1 m on concrete (6x). |
| Constant shock according to IEC 68-2-29: 40 G for 6 ms, 1000x all 3 directions. |
Vibration according to IEC 68-2-6: 20 G, 9 ... 200 Hz, 2 ... 9 Hz with amplit +/- 15 mm, 1 Octave / min.all 3 directions, 50
constant load. |
Electromagnetic compatibility: CE conformity (EMC) by application of harmonized standards: Interference stability EN 50082-2, IEC
61000-6-2 and EN 61326-1, interference emit EN 50081-1, EN 55022, CISPR 22, EN 61326-1 |
| Interference Stability |
Test Standard |
Effects |
| Electrostatic discharge (ESD) |
EN 61000-4-2 |
No effect |
| 15 kV air discharge, 8 kV contact discharge |
| High-frequency electromagnet radiation (HF) |
EN 61000-4-3 |
No effect |
| 200 V/m, 80 ... 1000 Mz |
| Conducted HF interference |
EN 61000-4-6 |
No effect |
| 30 V, 0.15 ... 80 MHz |
| Fast transients (burst) |
EN 61000-4-4 |
No effect |
| 4 kV |
| Surge |
EN 61000-4-5 |
No failure |
| Line-Line, Line-Case 500 V, 12 Ohm, 9 µF |
| 1 kV, 42 Ohm, 0.5 µF |
| Magnetic fields |
EN 61000-4-8 |
No effect |
| 30 A/m, 50 Hz |
| Insulation voltage |
500 VDC (optional 1000 VDC) |
No effect |
| 350 VAC (optional 700 VAC) |
| Interference Emit |
Test Standard |
Effects |
| |
EN 55022 |
|
| Conducted interference |
0.15... 30 MHz |
No emission |
| Radiation from housing |
30...1000 MHz, 10 meters |
No emission |
|
|
ORDERING INFORMATION
MODEL NUMBER ABCDEFGH
Example: 511-9A1003031 |
|
|
| FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE |
| A=Model |
B=Type |
*C=Range |
D=Seals |
E=Output |
F=Elect. Connections |
G=Press. Connections |
H=Connection Orifice |
| 511 |
9=Gage pressure |
A1= 0 to 30"Hg Vacuum |
00=FPM |
3=4-20 mA (2-wire, 8-33VDC) |
0=1.5 Meter Cable |
3= 1/4-18 NPT |
1=Without (ranges to 300 psi) |
| B1= 0 to 15 PSI |
| B4= 0 to 30 PSI |
2=With (ranges 500psi and greater) |
| B5= 0 to 60 PSI |
| B7= 0 to 100 PSI |
|
| C1= 0 to 200 PSI |
| C2= 0 to 300 PSI |
| C3= 0 to 500 PSI |
| D0= 0 to 750 PSI |
| D1= 0 to 1000 PSI |
| D2= 0 to 2000 PSI |
| D3= 0 to 3000 PSI |
| * Ranges in other units of pressure such as bar are available. Special ranges available on request. |
| Consult us with special requirements |
| BOLD ITEMS ARE TYPICALLY IN STOCK (2-3 week delivery for non-stock items) |
|
|
|
|
|
|
| PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS |
| A=Model |
B=Type |
*C=Range |
D=Seals |
E=Output |
F=Elect. Connections |
G=Press. Connections |
H=Connection Orifice |
| 511 |
9=Gage pressure |
A1= 0 to 30"Hg Vacuum |
00=FPM |
3=4-20 mA (2-wire, 8-33VDC) |
0=1.5 Meter Cable |
3= 1/4-18 NPT |
1=Without (ranges to 300 psi) |
| 8=Absolute pressure |
B1= 0 to 15 PSI |
20=NBR |
1= 0-5 V |
1=M12 x 1 (without female connector) |
A= 1/8-27 NPT |
2=With (ranges 500psi and greater) |
| |
B4= 0 to 30 PSI |
60=FPM SPEC |
2= 0-10 V (3-wire, 8-33VDC) |
|
1=G1/4 female |
|
| B5= 0 to 60 PSI |
|
|
5= M12 x 1.5 male |
| B7= 0 to 100 PSI |
6= M14 x 1.5 male |
| C1= 0 to 200 PSI |
|
| C2= 0 to 300 PSI |
| C3= 0 to 500 PSI |
| D0= 0 to 750 PSI |
| D1= 0 to 1000 PSI |
| D2= 0 to 2000 PSI |
| D3= 0 to 3000 PSI |
| E46= 0 to 5000 PSI (FPM SPEC seal only) |
| E56= 0-7500 PSI (FPM SPEC seal only) |
| |
| Accessories & Options: |
| 106975=Female connector for M12 x 1 |
| Packaging: |
| Single=Single Package for each transmitter |
| Multiple=Packaged in 25 piece lots |
| |
| * Ranges in other units of pressure such as bar are available. Special ranges available on request. |
| Consult us with special requirements |
| BOLD ITEMS ARE TYPICALLY IN STOCK (2-3 week delivery for non-stock items) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
