DC Magnet Drive Pump/Motor Unit DGD09 Series
24 V DC, 1500/3400/3900 RPM, Flow to 160 LPH
The DGD09 Series direct drive gear pumps derive from the well-established mag drive MG200 Series. Built to handle clean water and relatively viscous fluids at low pressure, the DGD09 Series Magnet Drive Pump/Motor Unit has low pulsation and is capable of handling fl ids at a maximum temperature of 70 °C (158 °F).
The pumps housing and the gears are made of Vectra. Seals are available in NBR or VITON®. The extreme compactness of its design makes the DGD09 Pump/Motor Unit the preferred choice where space is limited.
Suction and discharge ports are 8 mm barbed end.