DC Magnet Drive Pump/Motor Unit DGM09 Series
24 V DC, 3000 RPM, Flow to 140 LPH
DESCRIPTION
The DGM09 Series Magnet Drive Gear Pumps derive from the well-established mag drive MG200 Series. Built to handle clean water and relatively viscous fluids at low pressure, the DGM09 Series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 95°C (203°F).
The pump housing and the gears are made of Vectra. Seals are available in NBR, EPDM or VITON®.
The extreme compactness of its design makes the DGM09 Series DC Magnet Drive Gear Pump the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end.
