DGM09 DC Magnet Drive Pump/Motor Unit


24 V DC, 3000 RPM, Flow to 140 LPH

DESCRIPTION

The DGM09 Series magnet drive gear pumps derive from the well-established mag drive MG200 Series. Built to handle clean water and relatively viscous fluids at low pressure, the DGM09 Series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 95°C (203°F).

The pump housing and the gears are made of Vectra. Seals are available in NBR, EPDM or VITON®. The extreme compactness of its design makes it the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end. 

Motor: 24 V DC brush type
Speed: 3000 rpm
Weight: 0.55 Kg ( 1.21 Lbs)
Dimensions

TYPICAL APPLICATIONS

  • Water purification
  • Laser cooling
  • Water circulation
  • Condensation removal
  • Low pressure carbonation

PERFORMANCE (PRESSURE, FLOW, CURRENT CONSUMPTION)

Peformance Chart

ORDERING INFORMATION

ORDER NUMBER ABCD
EXAMPLE: DGM 09 E M01

PLEASE CALL 1-800-253-2497 TO ORDER THIS ITEM
A=Model B=Gear Width C=Seal Material D=Motor Type
DGM 09 (9 mm) E = EPDM M01 = 3000 rpm,24 V
N = NBR
V = VITON
DGM09 DC Magnet Drive Pump/Motor Unit
PUMPS >> LIQUID PUMPS >> DGM09 DC Magnet Drive Pump/Motor Unit