New Products at Clark
Furgut Series 1500 / Pressure/Vacuum Pump Model Series 15000
12VDC Powered Rotary Vane Pumps. Gas Flow to 12 LPM
These rotary vane pumps are an excellent pressure/vacuum source for gas analyzers, medical devices, process samplers and other analytical instrument applications. They are also useful for material handling and many general automation applications.
The pumps are quiet, reliable and mount in any position. The units operate oil free. The pump vanes have a service life of 1,000 hours and are easily field replaced without special tools.
Boxer 9QX Series Peristaltic Pumps, DC Gear or Stepper Motor, Liquid Flow to 200 ml/min
The 9QX is the smallest flip-top peristaltic pump available. With an elegant body design of just 40 x 62 mm (width x height) it stands just 21.5mm (depth) off a panel mount. The flip-top design allows tube loading and unloading with ultimate ease.
SMV SERIES LOW COST MINIATURE ISOLATION VALVE
INERT VALVES, 2-WAY NORMALLY CLOSED , 0.4 OR 0.8 MM ORIFICE
Model series SMV miniature diaphragm isolation
valves utilizes a specialty shape memory alloy for
actuation. They are suitable for a wide range of
clinical, analytical and laboratory instruments.
TYPE 525 PRESSURE TRANSMITTER
F.S PRESSURE RANGES FROM 1 TO 10 PSI, VOLTAGE/CURRENT/RATIOMETRIC OUTPUTS
Huba Type 525 pressure transmitters have a compact design along
with a high measurement accuracy.
The transmitters utilize proven Huba ceramic technology in use on
Huba pressure measurement products for over 20 years.
Diaphragm Pump Boxer 20K Series
The Boxer 20K Series Diaphragm Pump is a single headed miniature diaphragm pump.
Eldridge Products, Inc.
Series 400 ValuMass™ Flowmeters
Series 400 offer a lower cost option for many flow applications with the high value associated with all of EPI’s flow measurement instrumentation.
MODULAR MOLDED MANIFOLD VALVE SERIES XTA-2E
TWO-WAY, N.C., 1.6 MM ORIFICE, 2-12 VALVE CONFIGURATIONS
The XTA-2E is a modular design manifold consisting of valve blocks holding a pair of 2-way valves. The blocks are interconnected for a range of standard manifold configurations of up to 12 valves.
Huba Type 520, Relative/Gage Pressure Transmitter
F.S Pressure Ranges from 30 to 14,500 PSI, Voltage/Current/Ratiometric Outputs
The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
This transmitter meets high burst protection demands and is suitable for the use in all types of refrigerants including ammonia.
-Compact, rugged construction
-Welded without sealing parts, no elastomer seals
-Large selection of connections available
FV SERIES INERT ISOLATION TYPE MINIATURE SOLENOID VALVES
2-WAY N.C , 0.4 MM ORIFICE, HOSE BARB CONNECTION OR MANIFOLD MOUNT
FV series valves are only 4.2mm square(4.2×4.2×23.1mm
not including wires).They are an innovative and groundbreaking ultra-small solenoid valve that can be mounted
in the smallest of spaces, minimizing the manifold size and
shortening the length of flow paths.
DISPOSABLE FLOWMETER CLAMP HOLDER SYSTEM
F.S. RANGES OF 2 & 20 LPM, FREQUENCY OUT, FOR USE WITH EQUFLOW FLOW TUBES
These flowmeters feature Equflow disposable PVDF or PFA turbine flow sensors. They have low flow capabilities useful in a wide range of flow processes.
PERISTALTIC PUMP BOXER 25K
STEPPER MOTOR, SPEED CONTROL OPTIONS, LIQUID FLOW RATE TO 2100 ML/MIN
The 25K Series Peristaltic Pump is a versatile flip-top peristaltic pump offering flow to 2100 ml/min with an impressive range of features. The pump is driven by a 24 V stepper motor providing exceptional flow control with options for fully assembled drivers.
VORTEX FLOW TRANSMITTER 210 SERIES
FREQUENCY & ANALOG OUTPUT, 1/4″ TO 1.0″ PIPE SIZES, PPA CONSTRUCTION, FLOW FROM 0.24 TO 39.6 GPM (0.9 TO 150 LPM)
In comparison to the OEM Flow Sensor Series 200, the Series 210 Vortex Flow Transmitter is available with an increased range of power supply and output signals, all with and without temperature measurement
Pulse Width Modulation Flow Controller Model DC 3K
Model DC 3K PWM Flow Controller is designed specifically as a driver circuit for Boxer DC motor driven pumps.