PRODUCT SPECIFICATIONS > INSTRUMENTATION

Clark Solutions

CFS500 Series Shuttle Type Flow Switch

Threaded Plastic Piping, Liquid Flow Set Points from 0.25 GPM to 5 GPM

DESCRIPTION

The CFS500 offers low cost flow monitoring with a variety of switch actuation points and low pressure drop. All wetted parts are polypropylene or stainless steel, making this switch ideal for a wide range of chemical and temperature requirements.

The materials are also NSF or FDA approved for potable water treatment applications including chlorinators, purifiers and heaters. The CFS500 is ideal for equipment cooling including welders, lasers, etc. A J-box version with a 5 amp relay is also available for direct control of higher electrical loads, such as chlorinator pumps.

Click here for information on our other flow switches.

SPECIFICATIONS

Wetted Materials*:
     Housing, Bonnet, Shuttle, Shuttle Cap:
     Polypropylene, Hydrolytically Stable
     O-Ring: Viton® or Buna N
     Spring: 316 Stainless Steel
     Retaining Clip: PH 15-7 Mo Stainless Steel
Max. Operating Pressure:
     100 PSIG @ +70°F
     50 PSIG @ +180°F
     40 PSIG @ + 212°F
Max. Operating Temperature:
     0° to 212°F (100°C)
Set Point Accuracy: ± 20%
Set Point Differential: ± 20% Maximum
Switch: SPST, N.O. 20 VA, 120-240 VAC or VDC
Switch Rating, Maximum Resistive Load
VA Volts Amps AC Amps DC
20 0-30 0.4 0.3
120 0.17 0.13
240 0.08 0.06
Inlet/Outlet Ports: 3/4" NPT Electric Termination: Pilot: No. 22 AWG, 24" Zip Cord Lead Wires J-Box: 6' Cable * Materials of Construction are available for FDA or NSF Compliance. DIMENSIONS- INCHES (MM) Shuttle Type Flow Switch Dimensions Shuttle Type Flow Switch Typical Pressure Drop ORDERING INFORMATION
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE
OR PLEASE CALL 1-800-253-2497 TO ORDER THESE ITEMS
CFS500
Flow Setting GPM Part Number Pilot Duty Part Number J-Box w/5A Relay
0.25 C170231 C175901
0.50 C170232 C175902
1.00 C170233 -
2.00 C175117 -
2.50 C170234 -
5.00 C170235 -

Qty:

Show Discount Schedule