Clark
KSV 2-Way N.C. Solenoid Valve & 2-Way N.O. Vent Valve
DC Power, Air or Inert Gas, Pressure to 9 PSI
DESCRIPTION
Model series KSV offer great performance in a very economical design. This product is best suited for OEM applications where the valve performance is acceptable and where low component cost is necessary.

The valve body is fabricated from steel and therefore is limited to use with air and other inert gases.

The KSV is available in a two-way normally closed design and as a two-way, normally open vent valve (with one tube connection).

Product uses are on medical equipment such as filling and venting a cuff on automatic blood pressure measurement equipment, appliance applications and a range of industrial low pressure pneumatic on-off control applications.
SPECIFICATIONS
GENERAL
  6 VDC 12 VDC
Power 6VDC 12VDC
Operating Voltage 3.3-6.0 V 9.5-13.2V
Rated Current 60 mA 462 mA
Coil Resistance 100 Ohm±10% 25 Ohms±10%
Power Consumption 0.36W 5.54 W
Max Duty Cycle 100% 20%
Max Operating Pressure 6.7PSI 9 PSI
Operating Temperature 0-45°C 0-45°C
Insulation Class A A
Cycle Life Min 30K Min 50K(20%duty)
Dielectric Strength 500 VAC, 1mA for 1 minute
Insulation Resistance 50 MOhm at 500 VAC
Connection Pipe Dia. 3 mm 3 mm
Orifice Size 1 mm 1.8 mm
DIMENSIONS (MM)
1) PVC Wire: UL1095 28AWG, black
2) Nozzle: Steel
3) Bobbin: Plastic, 130°C
4) Wire: 2-uew, 130°C
5) Spring: Spring Steel
6) Washer: Rubber
7) Plunger: Steel
8) Tape: Mylar, 130°C
9) Frame: Cold Steel
ORDERING INFORMATION
SELECT MODEL NUMBER
FOR YOUR CONVENIENCE, THESE ITEMS ARE AVAILABLE ONLINE, OR PLEASE CALL 1-800-253-2497 TO ORDER
Model Description
KSV05B-6C Two-way, Normally Open, 6 VDC
KSV2WA-6A Two-way, Normally Closed, 6 VDC
KSV2WA-12C Two-way, Normally Closed, 12 VDC
Above items typically ship from stock
Consult Factory for other voltages

Qty:

Show Discount Schedule


For assistance call 978-568-3400
pumps | valves | instrumentation | new products | contact clark | site/product directory | enewsletter | home